Description

Mitsubishi OEM Rear Engine Mount for Evo X 5-Speed (1092A067)

Firstly, Buy Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067 online. The Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067 is a genuine Mitsubishi factory replacement designed for the 5-speed manual transmission version of the Mitsubishi Lancer Evolution X GSR. This mount plays an important role in securing the 4B11T engine and controlling engine movement within the chassis. When an original mount becomes worn, damaged, or compromised, replacing it with the correct OEM component helps restore the factory mounting arrangement and proper drivetrain support.

Part number 1092A067 is identified by Mitsubishi as a rear engine/side mount for the turbocharged Evolution with a 5-speed manual transmission. It is associated with the left-rear mounting position and is specifically differentiated from the rear mount used with the Evo X MR’s 6-speed TC-SST transmission.

Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067

The engine mounts on the Evo X are responsible for supporting the engine while limiting unwanted movement caused by acceleration, deceleration, shifting, and changes in engine torque. The rear engine mount is particularly important because it helps control the movement of the powertrain relative to the vehicle chassis.

With the Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067, you get a genuine factory replacement rather than a generic aftermarket mount. Mitsubishi designed the original mounting system around the 4B11T engine, chassis, and 5-speed manual drivetrain configuration.

This makes 1092A067 an excellent choice for Evo X GSR owners who want to maintain the original factory mounting configuration during a repair, restoration, engine replacement, clutch job, or transmission service.

Genuine Mitsubishi OEM Construction

Firstly, this is a genuine Mitsubishi OEM component. The part number 1092A067 is a Mitsubishi factory part number, and current OEM catalog information identifies it as a rear/left-side engine mount for the turbocharged Evolution with a 5-speed manual transmission.

Using a genuine OEM mount can be especially important when restoring an Evo X to factory specifications. The mounting location, attachment points, and overall design are intended for the original vehicle application.

For customers rebuilding or maintaining an Evo X GSR, choosing the correct Mitsubishi replacement can also eliminate the uncertainty that sometimes comes with generic replacement components.

Designed for the Evo X GSR 5-Speed

Secondly, the Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067 is intended for the Evo X GSR equipped with the 5-speed manual transmission. Current supplier documentation lists fitment for 2008–2015 Mitsubishi Lancer Evolution X GSR models.

It is important to distinguish this mount from the engine mount used on the Evo X MR. The MR uses the 6-speed TC-SST transmission and has a different rear engine mount, listed as MN184348. Mitsubishi’s parts catalog separately identifies 1092A067 for the rear position on 5-speed manual-transmission Evolution models and MN184348 for the rear position on 6-speed applications.

Because Evo X GSR and MR mounting components can look similar while having different applications, checking the vehicle VIN before ordering is recommended.

Helps Control Engine and Drivetrain Movement

Thirdly, a properly functioning rear engine mount helps keep the 4B11T powertrain securely positioned in the chassis. Engine movement naturally occurs as torque is applied, particularly during acceleration and gear changes. The mounting system is designed to control that movement while keeping the engine and drivetrain properly positioned.

A worn or damaged mount may contribute to excessive engine movement, drivetrain vibration, unusual movement during acceleration, or noticeable movement when shifting between gears. However, these symptoms can have several possible causes, so the mount should be inspected before replacement.

Installing the correct OEM component gives the vehicle a factory-spec mounting solution and helps maintain the intended relationship between the engine, transmission, chassis, and other connected drivetrain components.

1092A067 Specifications

• Brand: Mitsubishi
• Part Number: 1092A067
• Product Type: Rear Engine Mount / Engine Mount
• Position: Left rear / rear engine mounting position
• Vehicle: Mitsubishi Lancer Evolution X
• Application: Evo X GSR
• Model Years: 2008–2015
• Engine: 4B11T 2.0L turbocharged inline-four
• Transmission: 5-speed manual
• Chassis: CZ4A
• Condition: New genuine OEM replacement
• OEM Weight: Approximately 2.95 lb
• Diagram Reference: 02709
• Quantity: 1 rear engine mount

OEM Hardware and Related Components

The mount itself is supplied as one mount. Depending on the supplier package, related Evo X GSR mounting hardware may include or be separately available as MF911641, MF434105, and MR235604. These correspond to mounting bolts and a nut associated with the GSR rear engine-mount installation.

If you are replacing the mount during a larger engine or transmission project, inspect the associated bolts, nuts, brackets, and surrounding mounting points before installation. Reusing damaged or heavily corroded hardware may compromise an otherwise correct repair.

When Should You Replace an Evo X Rear Engine Mount?

A rear engine mount may require replacement if it shows visible deterioration, damage, excessive movement, or other signs of failure. Common reasons for replacing an engine mount include:

• Excessive engine movement
• Increased drivetrain vibration
• Clunking or knocking during acceleration
• Movement during gear changes
• Damaged or deteriorated mount material
• Engine or transmission service requiring mount removal
• Restoration of an older Evo X GSR
• Installation of a replacement 4B11T engine
• Repair of the 5-speed manual drivetrain

Not every vibration or drivetrain noise means the engine mount is defective. Other mounts, bushings, drivetrain components, exhaust components, or transmission parts can produce similar symptoms. A proper inspection is recommended before ordering replacement parts.

Why Choose a Genuine Mitsubishi Engine Mount?

The Evo X was engineered as a complete system. Engine mounts work together with the chassis, engine, transmission, driveshaft, axles, exhaust system, and other drivetrain components.

A genuine Mitsubishi mount provides a factory-designed replacement for the original application. This is particularly valuable for Evo X owners performing an OEM restoration, replacing worn factory components, or rebuilding a GSR to its original configuration.

For enthusiasts who prefer genuine Mitsubishi Evo parts, 1092A067 is a straightforward OEM solution for the rear engine mounting position on the 5-speed GSR.

Buy Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067

If you’re searching for a Mitsubishi OEM rear engine mount Evo X 5-speed 1092A067, verify that your vehicle is an Evo X GSR with the 5-speed manual transmission before ordering. The MR/SST model uses a different rear mount, so transmission type is an important fitment detail. Mitsubishi’s own parts catalog separates the 5-speed and 6-speed rear mounts.

This genuine Mitsubishi part is suitable for Evo X owners completing routine maintenance, replacing a worn engine mount, servicing the 4B11T drivetrain, performing an engine swap, or restoring a 2008–2015 Evolution X GSR.

Frequently Asked Questions

Is 1092A067 an OEM Mitsubishi part?

Yes. 1092A067 is a genuine Mitsubishi OEM engine mount identified in Mitsubishi parts catalogs and OEM supplier listings.

What Evo X does Mitsubishi 1092A067 fit?

The part is listed for the 2008–2015 Mitsubishi Lancer Evolution X GSR with the 5-speed manual transmission.

Does 1092A067 fit the Evo X MR SST?

No. The Evo X MR uses the 6-speed TC-SST drivetrain and a different rear mount, MN184348.

How much does the OEM mount weigh?

The OEM Evo X 5-speed rear mount is listed at approximately 2.95 pounds.

How many mounts are included?

The standard product is one rear engine mount. Related installation hardware may be purchased separately or included depending on the specific package being sold.

Should I verify my VIN before ordering?

Yes. Because Evo X GSR and MR models use different mounting components, VIN verification is recommended before purchasing to ensure the correct OEM part number for your vehicle. If you’re replacing a worn engine mount, servicing the 5-speed manual drivetrain, rebuilding your 4B11T, or restoring your Evolution X GSR to factory specifications, the Mitsubishi OEM Rear Engine Mount Evo X 5-Speed 1092A067 provides a genuine factory replacement for the rear engine mounting system, so shop and order your genuine Mitsubishi engine mount and other Mitsubishi Evo parts from evomotorparts.com today.