Description

RHD Triple Dash Gauge Pod 52mm or 60mm | 2001–2007 Mitsubishi Lancer Evolution VII, VIII & IX

Firstly, Buy Evo 7 8 9 RHD triple gauge pod for 2001–2007 Mitsubishi Lancer Evolution models. Upgrade your Mitsubishi Evolution’s interior with the Evo 7 8 9 RHD triple dash gauge pod, designed to mount three aftermarket gauges in the dashboard of a right-hand-drive vehicle. Made for the 2001–2007 Mitsubishi Lancer Evolution VII, VIII, and IX, this gauge pod provides a dedicated location for monitoring important engine and vehicle data.

Whether you are building a performance-focused street car, a track-day Evo, or a modified project vehicle, additional gauges can help you monitor operating conditions while driving. Depending on the gauges selected, you may be able to display information such as boost pressure, oil pressure, oil temperature, or air-fuel ratio.

The pod accommodates three gauge positions and is offered for 52mm or 60mm gauges, depending on the selected version and the modifications required. Its right-hand-drive configuration is important for owners whose dashboard layout differs from left-hand-drive models.

Before ordering, confirm the material option, gauge diameter, dashboard compatibility, and finish offered by the supplier.

Key Features of the Evo 7 8 9 RHD Triple Dash Gauge Pod

• Three-gauge layout: Provides space for three aftermarket monitoring gauges.
• Right-hand-drive design: Intended for the RHD dashboard configuration.
• Mitsubishi Evo VII, VIII and IX fitment: Listed for the 2001–2007 Evolution model range.
• 52mm or 60mm gauge compatibility: The pod is offered for these gauge sizes, although 60mm gauges may require trimming depending on the selected version.
• Multiple material options: Available choices may include fibreglass, partial-carbon construction, or carbon fibre, depending on the supplier’s options.
• Performance-focused interior upgrade: Helps organize additional vehicle monitoring equipment in a dedicated dashboard location.

Vehicle Fitment: Mitsubishi Lancer Evolution VII, VIII & IX

This RHD triple dash gauge pod is listed for the 2001–2007 Mitsubishi Lancer Evolution VII, VIII, and IX. Correct steering configuration is essential because the dashboard layout and surrounding trim can differ between right-hand-drive and left-hand-drive vehicles.

Before purchasing, verify your model year and confirm that the product is designed for your exact dashboard. If your Evo has a modified interior, an aftermarket dashboard, or previous trim alterations, additional fitting work may be necessary.

Also, check whether the version you select is intended for 52mm or 60mm gauges. Although some versions can be adapted to accommodate either size, the amount of trimming required can vary. Confirm the actual opening dimensions rather than relying on the nominal gauge size alone.

Monitor Three Important Vehicle Parameters

Additional gauges can help drivers keep track of operating conditions that may not be displayed on the factory instrument panel. The triple gauge arrangement allows you to select three monitoring functions that suit your engine setup and driving needs.

Firstly, a boost gauge can help you monitor turbocharger pressure. Secondly, an oil-pressure or oil-temperature gauge can provide useful information about engine lubrication and operating conditions. Thirdly, an air-fuel ratio gauge can help monitor mixture behaviour when used with a compatible sensor and controller.

The appropriate gauges depend on your engine modifications, tuning setup, and intended use. This pod is a mounting component; it does not itself measure vehicle data or include electronic monitoring functions unless the supplier explicitly states otherwise.

52mm or 60mm Gauge Options

Choosing the correct gauge diameter is essential for a clean installation. The product is advertised for 52mm or 60mm gauges, but compatibility depends on the selected pod configuration.

• 52mm gauges: A common size for aftermarket automotive instruments and the stated standard size for some versions of this pod.
• 60mm gauges: May be supported by a specific version or require careful trimming of the gauge openings.
• Gauge depth: Check the available clearance behind the pod for the gauge body, electrical connectors, and wiring.
• Gauge type: Confirm that the instruments you intend to use fit the openings and mounting method.

Before ordering, measure your gauges and verify the product’s actual aperture dimensions with the seller. Avoid enlarging the openings until you have confirmed the intended gauge size and checked that sufficient material will remain around each mounting position.

Material and Finish Options

The supplier lists material options for this product, which may include fibreglass, partial-carbon construction, and carbon fibre. The exact construction and finish depend on the selected variant.

Before purchase, confirm:

• The material of the selected version.
• Whether the surface is raw, unfinished, painted, or finished in visible carbon fibre.
• Whether any adhesive, clips, or mounting hardware are included.
• Whether trimming, sanding, filling, or painting is required.
• Whether the gauge openings are supplied ready for your chosen gauge size.

Fibreglass and partial-carbon products may arrive unfinished and require surface preparation before installation or painting. Carbon-fibre products can also vary in weave, finish, and appearance. Check the exact product specification rather than assuming all material options have the same finish or fitment characteristics.

Installation and Fitment Advice

Professional installation is recommended for the best fit and finish. Test fit the gauge pod before painting or making permanent modifications, especially if the selected version requires trimming.

During installation, check that all three gauges sit securely and remain visible from the driver’s seating position. Make sure the gauge bodies and wiring have sufficient clearance behind the pod and do not interfere with dashboard components or other equipment.

Route wiring securely and follow the instructions supplied with each gauge. Electrical connections and any pressure or temperature sensors should be installed according to the gauge manufacturer’s guidance.

If trimming is needed to accommodate 60mm gauges, measure carefully and remove material gradually. Confirm that the finished openings hold the gauges securely without compromising the surrounding structure.

Is This RHD Triple Gauge Pod Right for Your Evo?

This triple dash gauge pod is a practical option for owners of right-hand-drive Mitsubishi Lancer Evolution VII, VIII, and IX models who want to add three aftermarket monitoring gauges to their interior.

It is especially relevant for modified vehicles where monitoring boost, oil pressure, oil temperature, or air-fuel ratio is part of the setup. To ensure a successful installation, verify the steering configuration, gauge diameter, material, and dashboard fitment before ordering.

Frequently Asked Questions

Which Mitsubishi Evolution models does this gauge pod fit?

It is listed for the 2001–2007 Mitsubishi Lancer Evolution VII, VIII, and IX with right-hand drive. Confirm compatibility with your exact dashboard configuration before purchasing.

Can it fit three 60mm gauges?

The product is offered for 52mm or 60mm gauges, but 60mm fitment may require trimming depending on the selected version. Verify the opening dimensions with the supplier.

Are the gauges included?

The listing identifies a gauge pod. Do not assume the three gauges, sensors, wiring, or controllers are included unless the seller explicitly lists them in the package.

What material is available?

Material options may include fibreglass, partial carbon, or carbon fibre. Confirm the exact material and finish of your selected variant.

Is professional installation recommended?

Yes. Test fitting is recommended before painting or trimming, and professional installation can help achieve proper alignment and a clean finish. Improve the functionality of your Mitsubishi Evolution VII, VIII, or IX interior with the RHD triple dash gauge pod, and confirm gauge sizing, material selection, and fitment before ordering.