Description

Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734

Firstly, Buy Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734 online. The Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734 is a genuine Mitsubishi factory wheel manufactured by BBS for the Mitsubishi Lancer Evolution X MR. This lightweight forged wheel features an 18×8.5-inch size, +38 mm offset, 5×114.3 bolt pattern, and approximately 67 mm center bore. It is sold individually, making it an ideal choice for replacing one damaged or missing factory wheel or completing a matching set of genuine Evo X MR BBS wheels.

The 4250A734 is one of the most recognizable OEM performance wheels associated with the Evolution X MR. Its forged BBS construction combines factory fitment with a lightweight design and distinctive multi-spoke styling. For Evo enthusiasts who want to maintain an original appearance, this genuine Mitsubishi wheel offers a factory-correct alternative to aftermarket replicas.

Whether you are restoring an Evo X MR, replacing a damaged rim, or building an OEM-focused Mitsubishi Evolution, the 4250A734 provides the original BBS wheel specification associated with the MR platform.

Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734

The Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734 is designed around the factory Evo X chassis. Mitsubishi parts listings identify 4250A734 as an 18×8.5JJ alloy wheel, while specialist listings identify it as the BBS RG406.

Its 18×8.5-inch dimensions and +38 offset give it the factory-style configuration expected from the Evo X MR BBS setup. The 5×114.3 bolt pattern also makes this wheel relevant to other Mitsubishi Evolution applications, although exact vehicle fitment should always be confirmed before installation.

Genuine Mitsubishi OEM BBS Construction

Firstly, 4250A734 is a genuine Mitsubishi OEM wheel. It is listed under the Mitsubishi part number 4250A734 and is supplied as a factory replacement component.

Secondly, the wheel is manufactured by BBS and uses forged construction. Specialist BBS listings identify the wheel as the RG406 and specify an 18×8.5-inch forged design.

Thirdly, this is a single replacement wheel, not a four-wheel set. That makes it particularly useful when one original wheel has been damaged or when an Evo owner needs one additional wheel to complete a matching set. Current listings specifically state that the price is for one wheel.

Product Specifications

• Brand: Mitsubishi OEM / BBS
• Part Number: 4250A734
• BBS Model: RG406
• Product Type: OEM Forged Alloy Wheel
• Wheel Diameter: 18 inches
• Wheel Width: 8.5 inches
• Offset: +38 mm
• Bolt Pattern: 5×114.3
• Center Bore: Approximately 67 mm
• Construction: Forged aluminum
• Design: BBS Y-spoke / multi-spoke
• Weight: Approximately 18.5 lb per wheel
• Primary Application: Mitsubishi Lancer Evolution X MR
• Quantity: 1 wheel

The commonly listed specifications are 18×8.5, +38 offset, 5×114.3 bolt pattern, approximately 67 mm center bore, and approximately 18.5 pounds per wheel.

Evo X MR Factory Wheel Application

The 4250A734 is primarily associated with the Mitsubishi Lancer Evolution X MR. OEM parts information lists the wheel for the Evo X platform, while specialist suppliers specifically identify it as the factory Evo X MR BBS wheel.

This makes it an excellent replacement for an original MR wheel that has been damaged, lost, or replaced with a different wheel.

For owners restoring an Evo X MR, using the correct OEM wheel can also help preserve the vehicle’s original appearance. The BBS design is an important part of the MR’s factory performance identity.

Why Buy a Single OEM BBS Wheel?

Buying one genuine wheel makes sense when you do not need a complete set.

For example, a wheel can become damaged from a pothole, curb impact, road debris, or an accident. If the other three wheels are still in good condition, purchasing an entire aftermarket set is unnecessary.

A single 4250A734 can help you:

• Replace one damaged OEM wheel
• Complete an existing set of Evo X MR BBS wheels
• Restore an Evo X MR to factory appearance
• Replace a bent or cracked wheel
• Maintain matching OEM wheel specifications
• Build an OEM+ Mitsubishi Evolution
• Source an authentic replacement instead of a replica

Because this product is sold individually, you can order one wheel when that is all your project requires.

Lightweight Forged BBS Design

The forged BBS construction is one of the defining features of the 4250A734.

At approximately 18.5 pounds per wheel, the OEM BBS wheel is relatively lightweight for an 18-inch factory wheel.

Lower wheel weight can reduce unsprung mass. This can contribute to responsive steering and suspension behavior. The actual result will depend on the complete wheel and tire combination, vehicle setup, and driving conditions.

For an Evolution X enthusiast, the benefit is not only performance. The BBS wheel also provides the authentic styling associated with the Evo X MR.

Evo X Wheel Fitment

The 4250A734 uses a 5×114.3 bolt pattern, an 18×8.5-inch width, and a +38 mm offset. These specifications are commonly associated with the Evo X MR BBS setup.

The wheel is also commonly used by enthusiasts on earlier Mitsubishi Evolution models. However, having the same bolt pattern does not automatically guarantee complete fitment.

Before installing the wheel, verify:

• Brake clearance
• Hub and center-bore compatibility
• Tire size
• Suspension clearance
• Fender clearance
• Offset requirements
• Vehicle-specific modifications

This is particularly important on modified Evo 7, Evo 8, and Evo 9 vehicles.

Tire Compatibility

The 18×8.5-inch wheel provides a suitable platform for a variety of performance tire sizes.

A commonly documented Evo X MR combination is 245/40R18. However, the correct tire size depends on your vehicle, tire manufacturer, suspension setup, and intended use.

Always confirm that the selected tire is approved for the wheel width and that the complete wheel and tire combination provides adequate clearance.

If you are replacing only one wheel, matching the tire size and tread characteristics of the other three wheels is especially important.

Center Cap and Installation Hardware

The 4250A734 is sold as the wheel itself. A center cap is generally not included unless specifically stated in the product listing. TPMS sensors, valve stems, and lug hardware are also separate unless included with the purchase.

If you are replacing one wheel, inspect your existing center cap and hardware before ordering. This helps ensure that the replacement wheel matches the rest of your setup.

Proper installation is also essential. Use the appropriate wheel hardware and follow the manufacturer’s recommended wheel torque specifications.

Mitsubishi OEM Part Number 4250A734

When searching for this wheel, the primary Mitsubishi OEM part number is 4250A734.

You may also encounter the Mitsubishi reference 32862 4250A734 in some listings. BBS-related information identifies the wheel as the RG406.

Using the exact part number is especially important when purchasing a single replacement wheel. The Evo X was offered with multiple factory wheel designs, so visually similar wheels may not have the same dimensions or specifications.

Buy Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734 Online

If you are looking to buy Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734 online, this genuine Mitsubishi/BBS forged wheel is an excellent solution for replacing one damaged factory rim or completing an original Evo X MR BBS wheel set.

Its 18×8.5-inch size, +38 offset, 5×114.3 bolt pattern, forged BBS construction, and factory Evolution X application make it a desirable choice for restoration projects and performance-focused Mitsubishi builds.

For enthusiasts searching for genuine Mitsubishi Evo parts in the United States, Canada, the United Kingdom, Europe, Australia, Japan, and other international markets, ordering by the exact OEM part number helps ensure that you are sourcing the correct wheel for your build.

Frequently Asked Questions

Is 4250A734 a genuine Mitsubishi OEM wheel?

Yes. 4250A734 is listed as a genuine Mitsubishi OEM alloy wheel and is specifically associated with the Evo X platform.

Is the Evo X MR BBS wheel forged?

Yes. The 4250A734 is a forged BBS wheel. Specialist listings identify it as the BBS RG406 and specify forged construction.

Is this product one wheel or a set?

This listing is for one single wheel. It is not a four-wheel set.

What size is the 4250A734?

The wheel measures 18×8.5 inches and uses a +38 mm offset.

What is the bolt pattern?

The 4250A734 uses a 5×114.3 mm bolt pattern.

What is the center bore?

The listed center bore is approximately 67 mm, with specialist BBS information specifying 67.1 mm.

How much does one wheel weigh?

The commonly listed weight is approximately 18.5 lb (8.4 kg) per wheel.

Does the wheel include a center cap?

No. The center cap is generally sold separately unless specifically included in the product listing.

Can I use the 4250A734 on an Evo 8 or Evo 9?

These wheels are commonly used on earlier Mitsubishi Evolution models, including Evo 4–9. However, exact fitment should be confirmed based on brake clearance, suspension setup, tire size, hub dimensions, and fender clearance.

Can I buy just one wheel to replace a damaged wheel?

Yes. That is one of the main advantages of this listing. The 4250A734 is sold individually, making it suitable for replacing a single damaged or missing factory wheel. For Evo X MR owners restoring their vehicle or replacing a damaged factory rim, the Mitsubishi OEM Evo X MR Single BBS Wheel 4250A734 provides the genuine forged BBS design and factory 18×8.5 +38 specification, so shop and order your genuine Mitsubishi Evo wheels and other Mitsubishi Evo parts from evomotorparts.com today and complete your build with an authentic OEM BBS wheel.