Description

Powerflex Front Wishbone Front Bush – Mitsubishi Evo 7/8/9 – PFF44-1011-14

Firstly, Buy Powerflex Front Wishbone Front Bush Mitsubishi Evo 7 8 9 PFF44-1011-14 for 14mm-bolt applications. Upgrade the front suspension of your Mitsubishi Lancer Evolution with the Powerflex Front Wishbone Front Bush for Mitsubishi Evo 7/8/9 – PFF44-1011-14. Designed specifically for the Mitsubishi Lancer Evolution VII, VIII and IX, this polyurethane suspension bushing replaces the original front wishbone/control arm bushing and helps reduce unwanted movement under braking, acceleration, cornering and steering loads. Powerflex lists this application for Evo 7, Evo 8 and Evo 9 models from 2001–2007, including the Evolution 260.

The Powerflex PFF44-1011-14 is designed for applications using a 14 mm mounting bolt. This is an important fitment detail when ordering, because Powerflex also offers the PFF44-101 version for applications using a 12 mm bolt. Always verify the bolt size on your vehicle before purchasing.

Powerflex Front Wishbone Front Bush for Mitsubishi Evo 7/8/9

The front wishbone is an important part of the Evo’s suspension system. Its bushings allow controlled movement while isolating vibration between the suspension arm and chassis. Over time, factory rubber bushings can become softer, cracked or excessively flexible. That additional movement can affect suspension geometry and contribute to a less precise steering and handling feel.

Powerflex polyurethane bushes are designed to provide greater resistance to unwanted deflection than conventional rubber bushings. For an Evo 7, 8 or 9 used on the road, spirited driving or a performance-focused build, the PFF44-1011-14 can help maintain more consistent suspension control.

The Powerflex application catalog identifies this component as Diagram Reference #1, with two bushes required per vehicle.

Improved Front Suspension Control

Firstly, replacing worn front wishbone bushes can help restore more controlled suspension movement. A deteriorated rubber bushing may allow the control arm to move farther than intended when the vehicle is subjected to braking or cornering forces.

Secondly, the Powerflex polyurethane construction is designed to reduce this unwanted deflection. This can help the front suspension maintain more consistent geometry and give the driver a more connected steering response.

Thirdly, installing quality suspension bushes is an important consideration when refreshing an older Evo 7, Evo 8 or Evo 9 chassis. These cars are now well into their classic performance-car years, so replacing aging suspension components can be an important part of a comprehensive suspension refresh.

Powerflex describes its Evo 7/8/9 suspension range as an upgrade designed to improve suspension performance while retaining suitability for performance applications.

14mm Bolt Specification – Check Before Ordering

The PFF44-1011-14 is specifically designed for a 14 mm bolt. Powerflex clearly notes that the 12 mm application uses the different PFF44-101 part number.

This makes checking the existing hardware particularly important before ordering. Do not select the part number based only on the Evo generation. Verify the mounting configuration and bolt diameter on your vehicle.

Product Specifications

• Brand: Powerflex
• Part Number: PFF44-1011-14
• Product Type: Front Wishbone Front Bush
• Application: Front suspension
• Vehicle: Mitsubishi Lancer Evolution VII, VIII and IX
• Model Years: 2001–2007
• Special Application: Evolution 260 included
• Mounting Bolt: 14 mm
• Quantity Required Per Vehicle: 2
• Material: Polyurethane
• Diagram Reference: #1
• Position: Front wishbone/control arm front mounting location

Benefits of Powerflex Polyurethane Suspension Bushings

A suspension bushing has to control movement while allowing the suspension to articulate. When the original rubber material becomes worn or excessively compliant, suspension movement can become less controlled.

The PFF44-1011-14 is designed to provide a more controlled alternative. Benefits can include:

• Reduced unwanted control-arm movement
• More consistent front suspension geometry
• Improved steering precision
• Better control during braking
• Improved response during cornering
• More consistent handling under performance driving
• Durable polyurethane construction
• Ideal for suspension refresh and performance builds

The goal is not simply to make the suspension harder. It is to control unwanted bushing movement so the suspension can operate more consistently.

Evo 7, Evo 8 and Evo 9 Fitment

The Powerflex PFF44-1011-14 is cataloged for the following Mitsubishi Lancer Evolution applications:

Mitsubishi Lancer Evolution VII – 2001–2007 application range
Mitsubishi Lancer Evolution VIII – 2001–2007 application range
Mitsubishi Lancer Evolution IX – 2001–2007 application range
Evolution 260 – included in the Powerflex application listing

Because suspension hardware can vary, confirm that your vehicle uses the required 14 mm bolt before ordering.

Ideal for Street, Performance and Suspension Builds

The Powerflex front wishbone front bush is suitable for enthusiasts refreshing the suspension on a street-driven Mitsubishi Evo as well as owners building a more performance-oriented chassis.

It can be particularly useful when replacing multiple aged suspension bushings during a complete chassis refresh. Pairing the front wishbone bushes with other correctly selected Powerflex suspension components can provide a more comprehensive approach to restoring suspension control.

Powerflex also offers additional Evo 7/8/9 components, including front wishbone rear bushes, anti-roll-bar bushes and other suspension bushings.

Installation Considerations

Installation should be performed using appropriate suspension tools and procedures. The front wishbone must be safely supported, and all mounting hardware should be installed and torqued according to the appropriate Mitsubishi service information.

Before installation, inspect the surrounding control arm, mounting hardware and other suspension components for wear or damage. If multiple suspension components are being replaced, it is also sensible to inspect ball joints, tie rods, wheel bearings and other related components.

After replacing suspension bushings, a professional wheel alignment is recommended, particularly if the vehicle has additional suspension modifications.

Why Buy the PFF44-1011-14?

If your Evo 7, Evo 8 or Evo 9 has worn front wishbone bushes, the Powerflex PFF44-1011-14 provides a purpose-designed polyurethane replacement for the front wishbone mounting position. It is a direct-fit application for the specified Evo platform when the vehicle uses the required 14 mm bolt.

For enthusiasts searching for Mitsubishi Evo suspension parts, Powerflex bushings are a practical option for refreshing aging suspension components while improving control and maintaining a performance-focused chassis setup.

Frequently Asked Questions

Does PFF44-1011-14 fit the Mitsubishi Evo 7?
Yes. Powerflex lists PFF44-1011-14 for Mitsubishi Lancer Evolution VII, VIII and IX applications, including the Evolution 260.

What bolt size does PFF44-1011-14 use?
This version uses a 14 mm bolt. The 12 mm application uses PFF44-101 instead.

How many bushes are required for one car?
Powerflex’s application information specifies two bushes per vehicle.

Is this the front or rear wishbone bush?
This is the front bush for the front wishbone/control arm. It is listed as Diagram Reference #1.

Is PFF44-1011-14 suitable for an Evo 9?
Yes. The listed application covers Mitsubishi Lancer Evolution VII, VIII and IX from the relevant 2001–2007 generation range.

Should I check the bolt size before ordering?
Yes. This is especially important because Powerflex specifies PFF44-1011-14 for a 14 mm bolt and identifies PFF44-101 as the 12 mm alternative.

Can I use these as part of a complete suspension refresh?
Yes. The bush can be combined with other appropriately matched suspension components when refreshing the chassis of an Evo 7, Evo 8 or Evo 9. Upgrade the front suspension control of your Mitsubishi Lancer Evolution with the Powerflex PFF44-1011-14 and shop quality Mitsubishi Evo suspension parts at evomotorparts.com.

Buy Powerflex Front Wishbone Front Bush Mitsubishi Evo 7 8 9 PFF44-1011-14 for 14mm-bolt applications, Polyurethane suspension upgrade.