Description

Whiteline 08–15 Mitsubishi Lancer Evolution Rear Lower Control Arm Service Kit – KSK135

Firstly, BUY Whiteline KSK135 Rear Lower Control Arm Service Kit for Evo X. Restore precise rear suspension movement on your Mitsubishi Lancer Evolution with the Whiteline KSK135 Rear Lower Control Arm Service Kit. Designed specifically for use with the Whiteline KTA135 adjustable rear lower control arms, this service kit provides replacement bearings and hardware to maintain the performance and function of the KTA135 rear suspension system. Whiteline identifies KSK135 as a bushing service kit for KTA135 rear lower control arms, with a rear lower inner fitting position.

The KSK135 is not a complete replacement control-arm assembly. Instead, it is a dedicated service kit intended to refresh the bearings and associated hardware inside the Whiteline KTA135 rear lower control arms. This makes it particularly useful when the existing KTA135 arms remain serviceable but their bearings or mounting components require replacement.

The rear lower control arm is an important part of the Evolution’s rear suspension geometry. Maintaining properly functioning bearings helps the adjustable control arms move correctly while limiting unwanted deflection. Whiteline describes the KSK135 as a direct-fit bearing service kit designed to restore smooth suspension movement, reduce deflection, and sharpen steering response.

For Evo owners who already have the KTA135 system installed, the Whiteline KSK135 rear lower control arm service kit provides a practical way to maintain the suspension without replacing the complete control arms.

Key Features

• Genuine Whiteline performance suspension service kit
• Part number: KSK135
• Designed specifically for Whiteline KTA135 rear lower control arms
• Rear lower control arm service application
• Direct-fit replacement bearings
• Helps restore smooth suspension articulation
• Helps reduce unwanted suspension deflection
• Designed to improve suspension and steering response
• Includes replacement lockout washers and mounting hardware
• Whiteline 3-year warranty
• One kit required per vehicle application

Designed for Whiteline KTA135 Control Arms

The most important fitment detail for the KSK135 is that it is designed to service the Whiteline KTA135 rear lower control arms.

KTA135 is a complete pair of adjustable rear control arms equipped with zero-compliance bearings. Whiteline designed the arms to provide increased adjustment range and a more direct connection between the chassis and rear suspension, allowing rear camber and track to be adjusted more precisely.

The KSK135 allows owners to service those arms when the bearings or related components need replacement.

Firstly, the kit helps restore the intended movement of the KTA135 control arms.

Secondly, replacing worn bearings can help reduce unwanted movement and deflection within the suspension assembly.

Thirdly, maintaining the bearings helps preserve the precise operation of the adjustable Whiteline control-arm system.

This makes the KSK135 especially relevant for Evo owners who use their vehicles for spirited street driving, track days, autocross, or other performance applications.

Kit Contents

According to Whiteline’s official product information, the KSK135 contains:

• 4 × Bearings
• 4 × Lockout Washers
• 2 × Bolts
• 2 × Washers
• 2 × Nuts

Whiteline specifies one kit required for the application.

This is important when ordering because the KSK135 is a service kit for the KTA135 arms, rather than a complete pair of new control arms.

Suspension Performance Benefits

Suspension bearings have a direct influence on how accurately a control arm responds to chassis and wheel movement. When bearings become worn, damaged, or contaminated, unwanted movement can develop within the control-arm assembly.

The Whiteline KSK135 service kit is designed to restore the bearing interface of the KTA135 rear lower control arms.

A properly serviced control arm can help maintain consistent suspension geometry and reduce unwanted deflection. This is particularly important on a performance-oriented Evolution where alignment settings and rear suspension control can have a noticeable effect on handling.

Whiteline describes the KSK135 as a direct-fit bearing designed to restore smooth suspension movement, reduce deflection, and sharpen steering response without adding unwanted noise or harshness.

BUY Whiteline KSK135 Rear Lower Control Arm Service Kit for Evo X, Replacement bearings and hardware designed specifically for Whiteline KTA135 control

Vehicle Fitment

Current Whiteline and specialist fitment information lists the KSK135 for Mitsubishi Lancer Evolution applications including:

• 2008 Mitsubishi Lancer Evolution GSR
• 2008 Mitsubishi Lancer Evolution MR
• 2010–2015 Mitsubishi Lancer Evolution GSR
• 2010–2015 Mitsubishi Lancer Evolution MR
• 2010–2011 Mitsubishi Lancer Evolution MR Touring
• 2010 Mitsubishi Lancer Evolution SE
• 2015 Mitsubishi Lancer Evolution Final Edition

The service kit is specifically intended for Whiteline KTA135 rear lower control arms. Verify that your vehicle is equipped with the KTA135 arms before ordering.

Important Compatibility Information

The KSK135 should not be treated as a universal rear lower control-arm bushing kit for every Mitsubishi Lancer.

Its primary purpose is to service the Whiteline KTA135 adjustable rear lower control arms. If your vehicle has the original factory control arms or another aftermarket control-arm system, this product may not be applicable.

Before ordering, confirm both your vehicle application and the control-arm part number installed on the vehicle.

Installation

Whiteline lists an estimated installation time of approximately 2.5 hours and recommends a suspension specialist for installation. A rear wheel alignment is required following installation.

Because the KSK135 involves servicing rear suspension control arms and bearings, correct installation is important. The control arms should be inspected during disassembly to ensure there is no damage that would prevent proper bearing installation.

After installation, the vehicle should receive a proper rear-wheel alignment to ensure the suspension geometry is correctly adjusted.

Whiteline’s installation documentation recommends having suspension work performed by a qualified technician.

KSK135 vs. KTA135

It is useful to understand the difference between these two Whiteline part numbers:

KTA135 is the complete adjustable rear lower control-arm kit. It includes a pair of adjustable control arms with zero-compliance bearings and hardware.

KSK135 is the service kit designed to replace the bearings and related hardware used with the KTA135 arms.

Therefore, if you are purchasing the complete adjustable control arms for the first time, KTA135 is the relevant assembly. If you already own KTA135 arms and need to rebuild or service them, KSK135 is the appropriate service kit.

Frequently Asked Questions

What is Whiteline

SK135?KSK135 is a rear lower control arm service kit designed for Whiteline KTA135 adjustable rear lower control arms. It provides replacement bearings and associated hardware.

Does KSK135 include the KTA135 control arms?

No. KSK135 is a service kit. It does not replace the complete KTA135 control-arm assemblies.

What does the KSK135 kit include?

The kit includes four bearings, four lockout washers, two bolts, two washers, and two nuts.

Does KSK135 fit the Evo X?

Yes. Whiteline and current fitment listings identify the KSK135 for applicable 2008–2015 Mitsubishi Lancer Evolution models, including GSR, MR, MR Touring, SE, and Final Edition applications.

Do I need KTA135 to use KSK135?

Yes. The KSK135 is specifically designed as a service kit for the Whiteline KTA135 rear lower control arms.

Is wheel alignment required after installation?

Yes. Whiteline specifies that a rear wheel alignment is required following installation.

Why Buy from evomotorparts.com?

At evomotorparts, we specialize in Mitsubishi Evolution performance, suspension, drivetrain, engine, and replacement parts.

Our range includes genuine OEM Mitsubishi components and premium aftermarket products for Evo 7, Evo 8, Evo 9, and Evo X builds.

• Quality Mitsubishi Evolution performance parts
• OEM and premium aftermarket components
• Performance-focused Evo 4G63 and 4B11T parts
• Competitive pricing
• Worldwide shipping
• Dedicated customer support for Mitsubishi Evolution enthusiasts

Conclusion

The Whiteline KSK135 Rear Lower Control Arm Service Kit is a dedicated maintenance and rebuild solution for vehicles equipped with Whiteline KTA135 rear lower control arms. With replacement bearings, lockout washers, bolts, washers, and nuts, the kit is designed to restore smooth suspension movement and maintain the precise operation of the KTA135 adjustable rear suspension system.

For Evo X owners who already have KTA135 control arms installed, the KSK135 provides a practical way to service the bearings without replacing the complete control-arm assembly. Always confirm that your vehicle uses the KTA135 system before ordering.

BUY Whiteline KSK135 Rear Lower Control Arm Service Kit for Evo X, Replacement bearings and hardware designed specifically for Whiteline KTA135 control