JM Fab Evo 300M Coil On Plug Plate (EVO 7/8/9)

Description

JM Fab Evo 300M Coil On Plug Plate is available at EvoMotorParts for Mitsubishi Lancer Evolution 7/8/9 owners looking for trusted performance components. It is built to support fitment-focused performance and dependable installation confidence on street, track, or restoration-focused setups.

Check the full product overview below for fitment, features, and installation notes before ordering for your Mitsubishi Lancer Evolution 7/8/9.

If you’re looking to build your own 300M coil on plug setup for your EVO then this is the plate for you. It is CNC machined from 3/4″ thick 6061 aluminum and the coils are recessed into the plate for a clean professional look. The underside is pocketed out for weight savings. Includes new SS hardware. We now offer the plate in 2 different styles for both bolt patterns.
Please note that you will need to cut off the bolts that are attached to the coils from the factory and replace them with a nut/bolt combo (not included). Also the rubber boots will need to be trimmed since they are too long to work with the EVO head. We recommend purchasing the coils from rockauto.com, use P/N UF269, the newer AC Delco coils have a different bolt pattern.
The wiring and harnesses used to make the kit are Toyota parts, the following are the part numbers along with the quantity needed. These are NOT included:
Wire – 82998-12440 Qty. 8
Harness – 90980-11246 Qty. 4