Description

Mitsubishi OEM Front Lip for Evo 9 SE (6512A149WA)

Firstly, Buy Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA online. The Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA is a genuine Mitsubishi factory front lip designed for the 2006 Mitsubishi Lancer Evolution IX SE. This OEM SE-style air-dam skirt completes the lower portion of the Evolution IX SE front bumper while maintaining the original factory appearance and body lines of the CT9A.

For Evo 9 owners restoring an SE model, replacing a damaged front lip, or converting an appropriate Evo 9 front bumper to the SE configuration, the 6512A149WA provides the correct genuine Mitsubishi component. Current Evo parts suppliers identify this part specifically as the Evo 9 SE front lip, while Mitsubishi OEM listings describe it as a panel/air-dam skirt.

The 6512A149WA is different from the standard Evo 9 front lip, 6512A046WA. The standard lip is intended for the regular Evo 9 bumper, while 6512A149WA is the SE-style version. This distinction is important when ordering replacement exterior parts for a CT9A.

Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA

Firstly, the Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA is a genuine Mitsubishi replacement component rather than an aftermarket reproduction. It is designed around the Evolution IX SE front bumper and preserves the original factory styling.

Secondly, this is the SE front lip, not the standard/non-SE Evo 9 lip. Mitsubishi used a different configuration for the SE bumper, giving the front end a distinct lower profile. Current Evo-specific parts references identify 6512A149WA as the SE lip.

Thirdly, the OEM design makes this front lip an excellent choice for restoration projects. It can replace an original SE lip that has been cracked, scraped, damaged, or lost while keeping the exterior close to factory specification.

Genuine Mitsubishi OEM Construction

The 6512A149WA is manufactured as a genuine Mitsubishi exterior body component. It is commonly described as a front lip, front splitter, or air-dam skirt depending on the parts catalog or supplier.

Current OEM listings state that the replacement comes painted glossy white. However, the white is not specifically identified as a particular Evo factory paint code, so paint matching may be required if you want the lip to match your vehicle perfectly.

For a white Evo 9, the supplied finish may provide a close factory-style appearance. For an Evo painted Apex Silver, Graphite Gray, Rally Red, Electric Blue, or another color, professional refinishing may be appropriate.

Evo 9 SE Fitment

The Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA is intended for the following application:

• Make: Mitsubishi
• Model: Lancer Evolution IX
• Model Year: 2006
• Chassis: CT9A
• Trim: Evolution IX SE
• Component: Front lip / air-dam skirt
• Part Number: 6512A149WA
• Finish: Glossy white
• Brand: Mitsubishi
• Product Type: Genuine OEM exterior body component

The part is specifically identified by Evo parts suppliers as the 2006 Evolution IX SE front lip.

SE Front Lip vs. Standard Evo 9 Lip

One of the most important details when purchasing an Evo 9 front lip is choosing the correct bumper configuration.

The standard/non-SE Evo 9 uses 6512A046WA, while the SE configuration uses 6512A149WA. Current OEM catalogs and Evo-specific suppliers list these as separate front lip components.

The SE lip also uses additional pieces to connect the lip correctly to the bumper and undertray. These include:

• 6512A151 — left-side SE lip reinforcement
• 6512A152 — right-side SE lip reinforcement
• 6400B288 — SE lip lower insert/gap piece

These components are referenced by Evo IX parts guides as part of the SE lip installation system.

If you are simply replacing an existing complete SE lip and already have the required reinforcement pieces, 6512A149WA can serve as the replacement lip. If you are converting a standard Evo 9 bumper to the SE configuration, additional parts may be required.

Factory SE Exterior Styling

The Evolution IX SE has a distinctive factory appearance, and the front lip is an important part of that design.

The SE-style lip extends the lower edge of the front bumper and gives the car a more defined front-end profile. Unlike a large aftermarket splitter, it maintains the OEM character of the Evolution IX.

That makes 6512A149WA especially suitable for:

• Evo 9 SE restorations
• OEM CT9A builds
• Factory-style street cars
• OEM+ exterior projects
• Damaged SE lip replacement
• 2006 Evolution IX restorations
• Mitsubishi collector cars
• Evo 9 front bumper conversions

For an owner who wants to preserve the factory SE appearance, a genuine Mitsubishi lip is a natural choice.

What Is Included?

The product is the main OEM SE front lip.

Current listings state that the purchase includes the front lip itself and that corresponding installation parts are not included.

Product includes:

• 1 × Genuine Mitsubishi OEM SE front lip
• Part number 6512A149WA
• Factory glossy-white finish

Additional components may be required:

• 6512A151 left-side reinforcement
• 6512A152 right-side reinforcement
• 6400B288 lower insert/gap piece
• Mounting hardware and rivets
• Undertray-related hardware

If you are replacing an existing SE lip, inspect your current reinforcement pieces and fasteners before ordering.

Direct Replacement for an Evo 9 SE

Front lips are exposed to road debris and impacts because they sit close to the ground. Scrapes from parking stops, steep driveways, curbs, and road debris can eventually crack or damage the original component.

Replacing only the damaged lip can restore the front bumper without replacing the entire bumper cover.

The 6512A149WA is particularly useful when the original Evo 9 SE bumper is still in good condition but the lower lip has been damaged.

Before installation, inspect the bumper and mounting points. If the bumper or undertray has been modified, damaged, or replaced with aftermarket components, additional adjustment or hardware may be necessary.

Installation Considerations

Installation should begin with a careful test fit. Confirm that the lip and all related SE reinforcement pieces line up with the bumper before permanently securing the components.

If you are installing a new lip on an existing SE bumper, reuse only hardware that is still in good condition. Replace damaged or missing clips, rivets, and fasteners as necessary.

For a complete SE-style installation, make sure the side reinforcement pieces and lower insert are present. The SE lip is not simply interchangeable with every standard Evo 9 lip without considering these supporting pieces.

Professional body-shop installation is recommended when the bumper requires repair, paint matching, or conversion work.

Why Choose the OEM 6512A149WA?

There are many aftermarket Evo 9 front lips available in polyurethane, fiberglass, and carbon fiber. Those can be excellent choices for aggressive styling.

However, the Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA is the better option when originality and factory appearance are the priorities.

Genuine Mitsubishi part: It is a factory OEM exterior component.

Correct SE application: It is designed specifically around the Evo 9 SE front-end configuration.

Factory styling: It maintains the original SE bumper profile.

Gloss-white finish: The replacement is supplied in glossy white.

Restoration friendly: It is ideal for returning a damaged SE bumper to its original configuration.

Important Fitment Information

Do not confuse 6512A149WA with the standard/non-SE Evo 9 lip, 6512A046WA.

The two parts serve different bumper configurations. If your car has a standard Evo 9 front bumper, verify the correct standard lip before ordering. If your vehicle has an SE bumper, 6512A149WA is the appropriate SE-specific part to verify.

Also, if you are converting a standard bumper to an SE configuration, the lip alone is not necessarily enough. The SE setup uses additional reinforcement and insert pieces.

Frequently Asked Questions

What is Mitsubishi part number 6512A149WA?
6512A149WA is the genuine Mitsubishi OEM front lip/air-dam skirt used with the 2006 Evolution IX SE front bumper.

Is 6512A149WA the Evo 9 SE lip?
Yes. Evo-specific parts references identify 6512A149WA as the SE front lip.

Is 6512A149WA a genuine Mitsubishi OEM part?
Yes. It is sold as a genuine Mitsubishi factory replacement front lip.

What color does the OEM SE lip come in?
Current listings state that the replacement comes painted glossy white. The supplied white is not necessarily matched to every original Evo paint code, so paint matching may be required.

Does the lip include the SE reinforcement pieces?
No. The main lip is sold separately. The 6512A151, 6512A152, and 6400B288 supporting pieces are separate components.

Is 6512A149WA the same as the standard Evo 9 lip?
No. The standard/non-SE Evo 9 uses 6512A046WA, while 6512A149WA is the SE version.

Will this fit an Evo 8?
Not as a direct factory application. This is the SE-style Evo 9 front lip and is designed around the Evolution IX bumper configuration.

Can I use this lip for an Evo 9 SE restoration?
Yes. It is an excellent OEM replacement when restoring the original SE front bumper and maintaining the factory appearance.

Does the lip come with mounting hardware?

No. Current listings specify that the corresponding installation parts are not included. For owners restoring the distinctive CT9A SE front end, the Mitsubishi OEM Front Lip Evo 9 SE 6512A149WA delivers genuine Mitsubishi construction, correct SE-specific styling, and factory-style fitment for the 2006 Evolution IX, so shop and order your genuine Mitsubishi Evo 9 SE front lip and other Mitsubishi Evo parts from evomotorparts.com today.