Description

Mitsubishi OEM Front Lip for Evo 9 (Non-SE) (6512A046WA)

Firstly, Buy Mitsubishi OEM Front Lip Evo 9 6512A046WA online. The Mitsubishi OEM Front Lip Evo 9 6512A046WA is a genuine Mitsubishi factory replacement front lip designed for the standard, non-SE front bumper on the 2006 Mitsubishi Lancer Evolution IX. Also referred to as the standard front splitter or air-dam skirt, this OEM body component restores the original lower front-bumper appearance while maintaining the factory styling and fitment of the CT9A Evolution IX.

Mitsubishi produced different front lip configurations for the Evolution IX. The 6512A046WA is the standard/non-SE version, while the Evo 9 SE uses a different front lip, part number 6512A149WA. Current Mitsubishi Evo parts listings clearly separate these two applications.

If your standard Evo 9 front lip is damaged, cracked, missing, or needs replacement after a bumper repair, the genuine Mitsubishi 6512A046WA provides a factory-specific solution. It is also an excellent choice for an OEM restoration or a clean OEM+ exterior build.

Mitsubishi OEM Front Lip Evo 9 6512A046WA

Firstly, the Mitsubishi OEM Front Lip Evo 9 6512A046WA is a genuine Mitsubishi part rather than an aftermarket reproduction. That makes it an ideal choice for owners who want to preserve the original appearance of their Evolution IX.

Secondly, this is specifically the standard/non-SE front lip. It is intended for the standard Evo 9 bumper rather than the separate SE bumper and lip configuration. STM Tuned lists the part for the 2006 Mitsubishi Evolution IX bumper and identifies it as compatible with GSR, MR, RS, and SSL models.

Thirdly, the 6512A046WA helps complete the lower section of the factory front bumper. It follows the original bumper design instead of introducing an oversized aftermarket splitter or aggressive custom aero profile.

Genuine Mitsubishi OEM Construction

The 6512A046WA is manufactured as a factory Mitsubishi exterior body component. It is commonly cataloged as a front air-dam skirt or standard front lip.

The part is supplied painted in glossy white. Mitsubishi’s factory white is a generic white and is not specifically identified as Wicked White or Weightless White. If the color does not match your particular Evo 9, professional refinishing may be required.

This factory-painted finish can be particularly useful for white Evo 9 owners who need a replacement lip. For vehicles in other factory colors, the lip can be refinished to match the car.

Standard Non-SE Evo 9 Fitment

The Mitsubishi OEM Front Lip Evo 9 6512A046WA is intended for the standard Evolution IX front bumper.

Application:

• Make: Mitsubishi
• Model: Lancer Evolution IX
• Model Year: 2006
• Chassis: CT9A
• Trim: GSR
• Trim: MR
• Trim: RS
• Trim: SSL
• Bumper: Standard/non-SE Evo 9 bumper
• Part Number: 6512A046WA
• Component: Front lip / air-dam skirt
• Finish: Factory gloss white
• Brand: Mitsubishi
• Condition: Genuine OEM replacement

Current Evo-specific listings identify 6512A046WA as the standard Evo 9 front lip and specifically distinguish it from the SE lip.

Standard Evo 9 Lip vs. SE Lip

Fitment is especially important when ordering an Evo 9 front lip.

The standard/non-SE lip uses 6512A046WA, while the Evo 9 SE uses 6512A149WA. These should not be treated as the same part. Current Mitsubishi Evo parts catalogs and retailers list them separately.

If your Evo 9 has the standard front bumper, 6512A046WA is the appropriate OEM lip to verify against your vehicle. If you have an SE bumper, confirm the bumper configuration and use the appropriate SE components instead.

This distinction is important for restorations because installing the wrong lip can result in incorrect mounting points or an improper bumper profile.

Factory Appearance for OEM Evo 9 Builds

One of the biggest advantages of the Mitsubishi OEM front lip is its factory appearance.

Aftermarket carbon fiber and polyurethane lips can dramatically change the appearance of the Evolution IX. That can be desirable for performance or show builds. However, some owners want the car to retain its original Mitsubishi styling.

The 6512A046WA is suited to that approach.

It follows the standard factory bumper profile and maintains the clean lower-front appearance of the non-SE Evo 9. This makes it especially useful for:

• OEM restorations
• Factory-style Evo 9 builds
• OEM+ exterior projects
• Damaged front lip replacement
• Front bumper restoration
• White Evo 9s
• Standard GSR builds
• Standard MR builds
• RS and SSL applications
• CT9A street cars

What Is Included?

The product consists of the front lip itself.

Current listings specifically state that the purchase includes just the front lip. The corresponding installation clips are separate. STM identifies MU488006 splash-shield clips as the relevant hardware, with five clips listed for the installation.

Product includes:

• 1 × Genuine Mitsubishi OEM front lip
• Part number: 6512A046WA
• Factory gloss-white finish

Installation hardware is not included:

• MU488006 clips
• Additional mounting hardware
• Other bumper components

Check the condition of the existing mounting hardware before installation. If the original clips are missing, replacing them at the same time can help ensure a secure factory-style installation.

Direct Replacement for a Damaged Factory Lip

A front lip sits low on the vehicle and can be exposed to road debris, steep driveways, curbs, parking stops, and other obstacles. Over time, the original piece can become scratched, cracked, or broken.

Replacing the damaged component with the correct OEM part restores the lower bumper without requiring a complete front bumper replacement.

For an Evo 9 that still has its original standard bumper, the 6512A046WA can provide a much cleaner restoration than trying to repair a heavily damaged lip or adapting a universal aftermarket component.

Installation Considerations

Before installing the new lip, inspect the lower bumper and mounting points. Make sure the bumper itself is not damaged or distorted.

If the replacement is being installed on an original bumper, compare the new part with the old lip before removing all existing hardware. This makes it easier to identify missing clips or damaged mounting points.

The factory finish should also be inspected before installation. Although the part is supplied in gloss white, the factory white may not exactly match every white Evo 9 due to paint code, age, fading, or previous refinishing. Professional paint matching may be appropriate when necessary.

For the best fit and finish, professional body-shop installation is recommended.

Why Choose the Mitsubishi OEM 6512A046WA?

Choosing a genuine Mitsubishi component offers several advantages over a generic replacement.

Factory-specific fitment: The part was designed for the standard Evo 9 bumper.

OEM appearance: It maintains the original Mitsubishi exterior styling.

Correct non-SE application: It is specifically identified as the standard Evo 9 front lip rather than the separate SE version.

Factory finish: Mitsubishi supplies the part in a gloss-white finish.

Ideal for restoration: It is a strong choice for returning a CT9A to an original or OEM+ specification.

Frequently Asked Questions

What is Mitsubishi part number 6512A046WA?
It is the genuine Mitsubishi standard/non-SE front lip, also described as the front air-dam skirt, for the 2006 Evolution IX.

What Evo 9 models does 6512A046WA fit?
Current Evo-specific listings identify it for the 2006 Evo 9 GSR, MR, RS, and SSL with the standard front bumper.

Is 6512A046WA an OEM Mitsubishi part?
Yes. It is a genuine Mitsubishi factory replacement front lip.

Is 6512A046WA the SE front lip?
No. 6512A046WA is the standard/non-SE Evo 9 lip. The SE uses the different 6512A149WA part.

What color does the OEM lip come in?
Current listings state that Mitsubishi supplies this part painted gloss white. The factory white is not specifically identified as Wicked White or Weightless White.

Does the lip include installation clips?
No. The lip is sold separately. The corresponding MU488006 clips are listed separately and should be purchased if your existing clips are missing or damaged.

Will this fit an Evo 8?
No. This part is intended for the 2006 Evo IX standard bumper. Evo 8 uses a different OEM front lip assembly.

Can I use this on an Evo 9 SE bumper?
The standard and SE lips are different parts. Confirm your bumper configuration before ordering. The SE application uses 6512A149WA.

Is the part painted?

Yes. Current listings state that the genuine Mitsubishi 6512A046WA comes painted gloss white. If your vehicle is another color, it will need to be refinished to match. For owners restoring the standard CT9A front end, the Mitsubishi OEM Front Lip Evo 9 6512A046WA delivers genuine factory construction, standard non-SE fitment, and the original Evolution IX styling in a factory gloss-white finish, so shop and order your genuine Mitsubishi Evo 9 front lip and other Mitsubishi Evo parts from evomotorparts.com today.