‘+PLUS – 6 speed Mitsubishi EVO X
$7,410.006
Showing 1–16 of 335 results


Race Series Main Engine Bearings by ACL High performance driving demands that you use the best parts. So rely on ACL Race Series performance engine bearings to perform to exacting race standards you expect. They provide the dependability it takes to hold up under higher RPM conditions. The unique combination of design, metallurgy and engineering come…

ACL Race Series Rod Bearings The unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Features Designed to withstand higher RPM conditions. High strength overlay plate with reduced thickness for improved fatigue properties. Hardened steel backs on all rod bearings to improve the support…

If you want stronger holding power under boost, buy ACT ME3-HDG6 6 puck sprung clutch kit for 2008-2015 Evo X GSR and upgrade your clutch with confidence. This kit is built around ACT’s Heavy Duty pressure plate and a spring-centered 6-pad ceramic race disc, with the Monoloc release upgrade.

HD-M/Perf Street Sprung ME3-HDSS ME3-HDSS kit features ACT’s most popular Heavy Duty pressure plate and most popular street disc. ACT Heavy Duty pressure plates use an exclusive diaphragm design to increase clamp load, reduce deflection and maximize clutch life. All diaphragms endure a four-stage, heat-treating process for unparalleled performance. ACT pressure plates have precision cover…

ACT Monoloc Collar for OEM Clutch Cover 884007P is a one-piece, direct replacement or upgrade to the standard, two-piece wedge collar and wire ring featured in pull-type clutches. The spring tension of the segmented retaining ring is carefully calculated and tested for optimal performance. It provides uniform loading on the bearing and pressure plate to…

Advanced Clutch XACT Streetlite Flywheel 600550 is a Streetlite flywheel, which is considerably lighter than stock and is the most durable flywheel offering from ACT. Materials are properly distributed for maximum strength, lower inertia, good heat tolerance and rigidity. ACT’s Streetlite flywheels are preferred for street or drag racing. ACT flywheels are serviceable and can…

600555 – XACT Flywheel Prolite Drivers know that getting the fastest time on the track takes much more than just stomping on the gas pedal like it’s a spider in the kitchen. For all the work they do on engine power, they need a transmission that can make the most of every shift, keeping the…

AEM 1/8″ air inlet temperature sensor kit (AIT) with 1/8″ NPT male thread, high performance DTM-style connector, aluminum bung, connector & pins. Senses the air temperature on the inlet side of the engine.Includes:• Air Temp Sensor with 1/8″ NPT Male Thread• 1/8″ NPT Aluminum Bung• High Performance DTM-Style Connector• Connector & PinsAEM Install Guide: 30-2014…

AEM 3/8″ air inlet temperature sensor kit (AIT) with 3/8″ NPT male thread, aluminum bung, connector & pins. Senses the air temperature on the inlet side of the engine.Includes:• Air Temp Sensor with 3/8″ NPT Male Thread• 3/8″ NPT Alumium Bung• Mating Connector• Pins & Wire SealsAEM Install Guide: 30-2010 PDF InstallAEM air inlet temperature sensor…

AEM Replacement MAP sensor kits include stainless steel sensor, connector, pins, 1/8″ NPT to -4AN adapter & 1/8″ NPT to 3/16″ barb adapter. Available for 1, 1.5, 3.5 and 5 BAR. Part Number: Pressure: 30-2130-15 1 BAR 30-2130-30 1.5 BAR 30-2130-50 3.5 BAR 30-2130-75 5 BAR PSIg Discounts:We are sorry, but discount codes are not…

If you’re running an aftermarket clutch, reliability matters. buy AMS Evo X clutch master cylinder upgrade kit to replace the weak factory plastic master cylinder that can fail under higher clutch pressure. This upgrade is built for long-term durability and consistent pedal feel.
For quick reference, the AMS.04.03.0002-1 clutch master cylinder kit is designed specifically for Evo X owners who want a safer, more dependable hydraulic clutch system.

AMS EVO X Front Mount Intercooler The AMS Mitsubishi Lancer Evo X Front Mount Intercooler is a direct bolt on utilizing your stock piping and mounting points with purpose built cast end tanks for the Evolution 10. This intercooler has over 80% more internal flow area than its stock counterpart. Our stock Evolution 10 gained…

ETS / AMS Performance Fuel Pressure Regulator Kit | 2008-2015 Mitsubishi Evo X (AMS.04.07.0001-1)
If you want stable fueling, buy AMS.04.07.0001-1 fuel pressure regulator kit Evo X and upgrade the weak points in your factory routing. Next, if you’re comparing options, AMS.04.07.0001-1 fuel pressure regulator kit helps simplify a clean, serviceable setup.

Evo X Fuel Rail Kit by AMS Performance The AMS EVO X Fuel Rail provides increased fuel flow which is necessary at higher boost levels. This CNC aluminum rail comes anodized in Red or Black and includes our signature AMS logo. With a -6AN (7.5 mm) diameter inlet and outlet it dwarfs the stock rail…

Black Performance Intake System with Breather Bung by AMS The AMS EVO X Performance Intake removes clutter and simplifies your engine bay while adding horsepower! The exclusive design improves air flow to the turbocharger, increasing horsepower and performance. AMS installed their EVO X Performance Intake with an AMS Manual Boost Controller set at the factory…
WhatsApp us