Mitsubishi OEM Bumper Retaining Clip Screw for Evo 7/8/9/X (MS452393)

Description

Mitsubishi OEM Bumper Retaining Clip Screw for Evo 7/8/9/X (MS452393)

Firstly, BUY Mitsubishi OEM Bumper Retaining Clip Screw for Evo 7/8/9/X (MS452393) Secure your Mitsubishi Evolution bumper with the Mitsubishi OEM Bumper Retaining Clip Screw for Evo 7/8/9/X (MS452393). This genuine Mitsubishi OEM replacement fastener is designed for applicable Mitsubishi Lancer Evolution VII, VIII, IX, and Evolution X bumper mounting applications.

The OEM part number is MS452393, and Mitsubishi catalogs identify it as a front bumper screw. OEM Evo parts suppliers also list it as a bumper retaining screw with washer assembled, used on both front and rear bumper mounting locations depending on the Evolution generation and application.

If your original bumper screw is missing, damaged, stripped, corroded, or has been replaced with an incorrect universal fastener, the MS452393 provides a factory-correct replacement solution.

Genuine Mitsubishi OEM Bumper Retaining Screw

The MS452393 bumper retaining clip screw is a genuine Mitsubishi factory fastener designed to work with the appropriate bumper retaining hardware.

This small component plays an important role in securing the bumper to the vehicle. Using the correct OEM fastener helps maintain the intended mounting arrangement and can prevent unnecessary bumper movement or uneven fitment.

The MS452393 is commonly used with the MR393386 retaining grommet in applicable bumper mounting locations.

This OEM screw is ideal for:

• Mitsubishi Evolution 7 bumper repairs
• Mitsubishi Evolution 8 bumper repairs
• Mitsubishi Evolution 9 bumper repairs
• Mitsubishi Evolution X bumper repairs
• Front bumper replacement
• Rear bumper replacement
• Collision repair
• OEM restoration projects
• Replacement of missing bumper hardware
• Factory-style exterior restoration

Evo 7/8/9/X Fitment

The MS452393 is widely listed for Mitsubishi Evolution models spanning the CT9A and CZ4A generations. Applications include Evolution VII, Evolution VIII, Evolution IX, and Evolution X.

Typical applications include:

• Evolution VII — 2001–2002
• Evolution VIII — 2003–2005
• Evolution IX — 2006
• Evolution X — 2008–2015

The screw is used in specific bumper mounting positions, and the exact location can vary between generations and bumper configurations. Therefore, checking the vehicle-specific parts diagram or VIN is recommended before ordering.

Front and Rear Bumper Applications

One of the useful features of the MS452393 is its application across different bumper mounting locations.

OEM parts references identify the component as a front bumper screw, while Evo parts suppliers list it for applicable front and rear bumper retaining locations.

For example, EvolutionM documentation identifies MS452393 screw/washer assemblies at bumper mounting locations and shows them paired with MR393386 grommets.

This makes MS452393 an important piece of replacement hardware when rebuilding or restoring an Evo bumper.

Replace Missing or Damaged Bumper Hardware

Bumper hardware is easy to overlook during a repair. However, a missing screw can leave part of the bumper insufficiently secured and may contribute to movement, loose mounting points, or inconsistent panel gaps.

Firstly, inspect the bumper and identify every missing or damaged fastener.

Secondly, verify the OEM part number MS452393 against your vehicle’s parts diagram before ordering.

Thirdly, inspect the associated MR393386 retaining grommet and surrounding mounting area. A worn or damaged grommet should be replaced rather than installing a new screw into a compromised mounting point.

Using the correct screw and retaining hardware together helps reproduce the factory mounting arrangement.

Genuine OEM Replacement for Evo Restoration

For enthusiasts restoring a Mitsubishi Evolution, small factory fasteners can make a significant difference in the final result.

Universal screws may physically hold a bumper in place, but they may not have the correct dimensions, washer arrangement, finish, or fitment required for the original mounting location.

The Mitsubishi MS452393 provides a genuine OEM replacement for owners who want to maintain factory-correct bumper hardware.

This is particularly useful when restoring an Evo that has previously undergone:

• Front-end collision repair
• Rear bumper replacement
• Bumper repainting
• Bodywork
• Aftermarket bumper installation
• Exterior restoration
• Multiple previous repairs

MS452393 Works With MR393386

The MS452393 is commonly paired with the MR393386 Mitsubishi retaining grommet. The grommet provides the appropriate mounting point while the screw secures the bumper assembly.

If you are rebuilding the bumper mounting hardware on an Evo 7, 8, 9, or X, it is worth inspecting both components rather than replacing only the screw.

A damaged grommet can prevent the new screw from securing the bumper correctly, even when the screw itself is genuine OEM.

Quantity and Installation

The MS452393 is sold individually by OEM Evo parts suppliers. Supplier listings commonly specify two screws per bumper for the applicable applications, although the exact quantity should be confirmed against the vehicle-specific parts diagram.

This makes the individual-sale format useful if you have lost only one fastener or need to replace a damaged screw.

When installing, avoid overtightening the fastener, particularly when securing components to plastic bumper mounting points or retaining grommets.

Buy Mitsubishi Evo Bumper Hardware Online

At evomotorparts, we specialize in Mitsubishi Evolution OEM, replacement, and performance parts for enthusiasts, builders, restoration projects, and performance-focused owners.

Our inventory covers Evo 7, Evo 8, Evo 9, and Evo X, including bumper components, exterior trim, grille parts, headlights, fog-light components, OEM fasteners, engine parts, drivetrain components, suspension, and performance upgrades.

The MS452393 bumper retaining clip screw is an inexpensive but important component for anyone rebuilding or maintaining an Evo bumper.

Whether you’re repairing an Evolution VII, restoring an Evolution VIII or IX, or maintaining an Evolution X, sourcing the correct Mitsubishi OEM fastener can help keep the bumper installation clean and factory-correct.

evomotorparts also supports worldwide shipping for Mitsubishi Evolution owners in the United States, Canada, Australia, United Kingdom, Japan, Europe, and other international markets.

Frequently Asked Questions

What is Mitsubishi part number MS452393?

MS452393 is a genuine Mitsubishi OEM bumper retaining screw. Mitsubishi parts references identify it as a front bumper screw, while Evo parts suppliers describe it as a bumper retaining screw with washer assembled.

What Evo models use MS452393?

The part is listed for applicable Evolution VII, VIII, IX, and X models, covering the CT9A and CZ4A generations.

Is MS452393 used on the front or rear bumper?

It can be used in front and rear bumper mounting applications, depending on the Evolution model and specific mounting location.

What retaining grommet works with MS452393?

The MR393386 retaining grommet is commonly paired with MS452393 in applicable bumper mounting locations.

How many MS452393 screws do I need?

OEM Evo parts suppliers commonly specify two screws per bumper, but the exact quantity can vary according to the bumper and vehicle configuration. Confirm the required quantity using your vehicle-specific parts diagram.

Is MS452393 sold individually?

Yes. The screw is commonly sold individually, making it possible to replace only the missing or damaged fastener.

Is MS452393 a genuine Mitsubishi OEM part?

Yes. MS452393 is listed by Mitsubishi OEM parts specialists as a genuine Mitsubishi factory replacement screw.

Is MS452393 the same as a regular bumper screw?

MS452393 is a specific Mitsubishi OEM fastener with an integrated washer arrangement intended for particular bumper mounting applications. It should not automatically be substituted with a generic screw simply because the dimensions appear similar.

Conclusion

The Mitsubishi OEM Bumper Retaining Clip Screw for Evo 7/8/9/X (MS452393) is a genuine factory replacement fastener designed for applicable Mitsubishi Evolution bumper mounting applications. Listed for Evolution VII, VIII, IX, and X, this OEM screw helps secure the bumper while maintaining the correct factory-style installation.

Whether you’re replacing a missing fastener, repairing collision damage, installing a replacement bumper, or completing an OEM restoration, the MS452393 provides the correct Mitsubishi replacement solution.

Buy the Mitsubishi OEM Bumper Retaining Clip Screw MS452393 online from evomotorparts and restore your Evo 7, Evo 8, Evo 9, or Evo X bumper with genuine OEM hardware.