Mitsubishi OEM Front Bumper Screw for Evo 7/8/9/X

Description

Mitsubishi OEM Front Bumper Screw for Evo 7/8/9/X

Firstly, BUY Mitsubishi OEM Front Bumper Screw for Evo 7/8/9/X, Keep your Mitsubishi Evolution front bumper properly secured with the Mitsubishi OEM Front Bumper Screw for Evo 7/8/9/X. This genuine factory replacement fastener is designed for applicable Mitsubishi Lancer Evolution VII, VIII, IX, and Evolution X front bumper applications. It is an ideal solution when original bumper screws are missing, damaged, stripped, corroded, or have been replaced with incorrect hardware.

Small OEM fasteners can make a major difference when restoring an Evolution. A front bumper may appear complete, but missing or incorrect mounting hardware can lead to loose bumper sections, poor alignment, unwanted movement, and inconsistent panel gaps. Replacing the original fastener with the correct Mitsubishi OEM screw helps restore the intended factory-style installation.

Genuine Mitsubishi OEM Front Bumper Hardware

The front bumper on a Mitsubishi Evolution relies on several brackets, clips, screws, bolts, and other mounting components to maintain its correct position. The right fastener helps secure the bumper to the surrounding mounting points without relying on improvised hardware.

This OEM front bumper screw is listed as Mitsubishi part number MS450156 and is supplied individually. Parts references identify it as a 5×12 screw used in the front bumper mounting system on applicable Evolution models.

For Evo owners restoring a vehicle to factory specifications, replacing missing hardware with genuine Mitsubishi components is a simple way to improve the quality and completeness of the finished repair.

Evo 7, Evo 8, Evo 9 and Evo X Fitment

This bumper screw is associated with Mitsubishi Evolution applications covering the 2001–2006 Evolution VII, VIII, and IX and the 2008–2015 Evolution X. However, Mitsubishi used multiple bumper fasteners and mounting components, so always verify the exact part number against your vehicle and parts diagram before ordering.

This makes the product useful for a variety of projects, including:

• Evo 7 front bumper replacement
• Evo 8 OEM bumper restoration
• Evo 9 front-end repairs
• Evo X bumper installation
• Collision repair
• OEM restoration
• Replacement of missing bumper hardware
• Refreshing old or damaged exterior fasteners

Restore Proper Front Bumper Installation

Firstly, inspect all of the existing bumper mounting hardware before installation. If several screws or clips are missing, replacing only one fastener may not completely resolve bumper movement or alignment issues.

Secondly, compare the replacement screw with the original hardware and verify the correct mounting location. Evolution models can use different fasteners throughout the front bumper assembly, so the correct part number is important.

Thirdly, check the condition of the bumper brackets, retaining clips, bumper supports, fender mounting points, and surrounding hardware. Damaged mounting components can prevent even a correct OEM screw from securing the bumper properly.

BUY Mitsubishi OEM Front Bumper Screw for Evo 7/8/9/X, Genuine factory replacement hardware for secure bumper mounting and proper OEM fitment.

Ideal for OEM Evo Builds and Repairs

The Mitsubishi OEM Front Bumper Screw is a useful replacement component for both standard street cars and enthusiast-built Evolution models. Whether you are repairing a daily-driven Evo, restoring a low-mileage example, rebuilding a damaged front end, or preparing a show-quality vehicle, proper OEM hardware helps complete the installation correctly.

For enthusiasts who have purchased a used bumper or front clip, replacing missing screws and clips is especially useful. Used bumpers are often sold without every original mounting fastener, leaving the new owner to source individual Mitsubishi components.

Using the correct OEM hardware also makes future bumper removal and installation easier because the mounting system remains close to the original Mitsubishi configuration.

Buy Mitsubishi Evo Bumper Hardware Online

At Evomotorparts, we specialize in Mitsubishi Evolution parts for owners, builders, restorers, and performance enthusiasts. Our inventory covers Evolution 7, Evolution 8, Evolution 9, and Evolution X OEM, replacement, and performance components.

Along with bumper screws, customers can source related Evolution exterior hardware such as bumper retaining clips, brackets, supports, bolts, bumper components, headlights, fenders, grilles, and other front-end parts.

If you are rebuilding an Evo front bumper assembly, it is worth checking all mounting hardware at the same time. Replacing several inexpensive missing fasteners can help produce a much cleaner and more secure final installation.

Evomotorparts also offers worldwide shipping, helping Mitsubishi Evolution owners source OEM replacement components from the United States and international markets.

Frequently Asked Questions

What is the OEM part number?

The OEM part number associated with this Mitsubishi front bumper screw is MS450156. Parts references identify it as a 5×12 screw.

What Evo models does it fit?

It is listed for applicable Mitsubishi Evolution VII, VIII, IX, and X applications. Always verify the exact part number against your VIN or vehicle-specific parts diagram.

Is the screw sold individually?

Yes. The referenced OEM listing specifies that the screw is sold individually, so customers can purchase the quantity required for their repair.

Why should I use an OEM bumper screw?

An OEM fastener is designed for the original Mitsubishi mounting system. Using the correct hardware helps maintain proper fitment and avoids problems associated with incorrect thread sizes, lengths, or head designs.

Can I use this for an Evo X?

The part is listed for the 2008–2015 Mitsubishi Lancer Evolution X, but Evo X has multiple bumper fasteners, so verify the specific location and part number before ordering.

Is this the same as MS452393?

No. MS452393 is a separate Mitsubishi bumper retaining clip screw used on applicable front and rear bumper locations. The front bumper screw listed here is MS450156.

Conclusion

The Mitsubishi OEM Front Bumper Screw for Evo 7/8/9/X is a small but important component for maintaining secure and factory-correct front bumper installation. With the correct OEM hardware in place, Evolution owners can replace missing or damaged fasteners while preserving the original mounting arrangement.

Whether you are restoring an Evo 7, Evo 8, Evo 9, or Evo X, replacing missing bumper hardware is an inexpensive way to improve the quality and completeness of your front-end repair.

Buy Mitsubishi OEM Evolution bumper hardware online from Evomotorparts and keep your Evo’s exterior properly secured with the correct factory-style components.