Description

Mitsubishi OEM Front License Plate Bracket for Evo 8 (MN165998)

Firstly, Buy Mitsubishi OEM Front License Plate Bracket Evo 8 MN165998 online. The Mitsubishi OEM Front License Plate Bracket Evo 8 MN165998 is a genuine Mitsubishi factory replacement bracket designed to mount the front license plate assembly to the front bumper of the 2003–2005 Mitsubishi Lancer Evolution VIII. If your Evo 8 is missing its original front plate bracket, has a damaged mounting piece, or is being restored to factory specification, this OEM replacement provides the correct factory-style mounting solution.

Mitsubishi designed the Evolution VIII with a dedicated front license plate mounting system. The MN165998 is the black metal bracket used as part of that assembly. It attaches to the front bumper and provides the mounting structure needed for the front license plate setup. Current Mitsubishi parts references identify MN165998 as a genuine License Panel Mount Bracket / Front License Plate Bracket for 2003–2005 Lancer Evolution models.

Unlike universal license plate holders, this Mitsubishi OEM bracket is designed specifically around the factory Evo 8 front bumper mounting arrangement. That makes it a useful replacement for enthusiasts who want to maintain the original appearance and hardware layout of their CT9A.

Mitsubishi OEM Front License Plate Bracket Evo 8 MN165998

Firstly, the Mitsubishi OEM Front License Plate Bracket Evo 8 MN165998 is a genuine Mitsubishi part rather than a generic aftermarket bracket. OEM parts are manufactured to match the vehicle’s original design and mounting points. For an Evo 8 restoration or OEM-focused build, using the correct factory bracket can help preserve the original fit and appearance.

Secondly, MN165998 is specifically associated with the 2003–2005 Mitsubishi Lancer Evolution VIII. STM Tuned lists the bracket for the Evolution VIII front bumper and identifies it as the metal plate bracket, while Mitsubishi parts catalogs list MN165998 for 2003–2005 Lancer Evolution, Evolution MR, and Evolution RS models.

Thirdly, this bracket is especially useful when replacing missing or damaged front license plate mounting components. It can also be used during a front bumper replacement or restoration when the original license plate hardware is incomplete.

Genuine Mitsubishi OEM Construction

MN165998 is the factory-style black metal front license plate bracket. It is designed to provide a solid mounting point for the front license plate assembly rather than relying on a universal adhesive, plastic, or aftermarket mounting solution.

The bracket is sold as an individual component. Current Evo-specific listings confirm that the purchase includes one metal bracket. The surrounding license plate garnish and mounting hardware are separate components.

This distinction is important when ordering. The Evo 8 front license plate system can include additional pieces such as the plastic plate holder or garnish, grommets, nuts, bolts, and screws. STM’s complete installation-parts reference lists MN165998 alongside several other components required for the full factory-style installation.

Evo 8 Front License Plate Fitment

The Mitsubishi OEM Front License Plate Bracket Evo 8 MN165998 is intended for the following application:

• Make: Mitsubishi
• Model: Lancer Evolution VIII
• Model Years: 2003–2005
• Chassis: CT9A
• Engine: 2.0L 4G63T
• Trim Applications: Evolution, Evolution MR, Evolution RS
• Part Number: MN165998
• Component: Front license plate mounting bracket
• Material: Metal
• Finish: Black
• Quantity: 1 bracket

Mitsubishi’s parts catalog also identifies MN165998 as the License Panel Mount Bracket for 2003–2005 Evolution models.

Factory-Style Replacement for CT9A Builds

A missing license plate bracket may seem like a small issue, but it can make a noticeable difference when completing an OEM-style Evo 8 exterior. The correct bracket keeps the front plate assembly positioned using the factory mounting arrangement.

It is particularly useful for:

• OEM restoration projects
• Evo 8 front bumper replacements
• Street-driven CT9A builds
• Factory-specification restorations
• Replacement of damaged license plate brackets
• Completing an incomplete front license plate assembly
• Enthusiasts replacing universal aftermarket brackets
• Mitsubishi Evolution VIII parts collections

If your original bracket has been bent, damaged, corroded, or lost during a bumper replacement, MN165998 gives you the opportunity to return to the factory mounting configuration.

Important Installation Information

The MN165998 is the metal bracket only. It should not be confused with the complete Evo 8 front license plate mounting kit.

The original Evo 8 system can use additional components, including the plastic plate holder/garnish and various bolts, screws, grommets, and nuts. STM specifically lists MN126768 as the plastic plate holder and MN165998 as the metal plate bracket within the larger installation system.

Therefore, check your existing bumper and hardware before ordering. If your vehicle is missing several components, you may need additional factory hardware to complete the installation.

For the best result, inspect the bumper mounting points before installation. Make sure the bracket sits correctly and that all mounting hardware is secure. Always verify the part number against your vehicle’s VIN when possible, particularly if the front bumper has been changed from the original Evo 8 configuration.

Why Choose the OEM MN165998 Bracket?

The biggest advantage of the Mitsubishi OEM bracket is its factory-specific design. A universal plate bracket may require modification or may not position the license plate correctly. MN165998 was designed for the Mitsubishi Lancer Evolution VIII front bumper assembly.

It also makes sense for enthusiasts who are rebuilding an Evo 8 with genuine Mitsubishi components. Matching the original mounting hardware helps maintain the vehicle’s factory character while providing a clean and secure license plate installation.

What Is Included?

This product includes:

• 1 × Genuine Mitsubishi OEM Front License Plate Bracket
• Part Number: MN165998

Not automatically included:

• Plastic license plate holder/garnish
• License plate
• Mounting bolts
• Screws
• Grommets
• Nuts

The complete factory mounting system uses additional components, so confirm what hardware you already have before placing your order.

Frequently Asked Questions

What vehicles use Mitsubishi MN165998?
MN165998 is listed for 2003–2005 Mitsubishi Lancer Evolution VIII models, including Evolution, Evolution MR, and Evolution RS applications.

Is MN165998 a genuine Mitsubishi OEM part?
Yes. Mitsubishi parts catalogs and Evo-specific suppliers identify MN165998 as a genuine Mitsubishi OEM license panel/front license plate mounting bracket.

Does this include the plastic license plate holder?

No. MN165998 is the metal bracket. The plastic plate holder is a separate component, and STM identifies MN126768 as that discontinued plastic piece.

Does the bracket include all installation hardware?
No. The bracket is sold separately. Additional bolts, screws, grommets, and nuts may be required depending on what is already installed on your Evo 8.

Will MN165998 fit an Evo 9?
The verified Evo-specific listings identify MN165998 for the 2003–2005 Evolution VIII. Evo IX uses a different front license plate mounting arrangement, so verify the correct part number before ordering for a 2006 model.

Is this bracket suitable for an OEM restoration?

Yes. Because it is a genuine Mitsubishi factory bracket designed for the Evo 8 front bumper, it is an appropriate choice for restoring the original front license plate mounting system. Restore the correct factory mounting setup on your CT9A with the Mitsubishi OEM Front License Plate Bracket Evo 8 MN165998, a genuine black metal bracket designed for the 2003–2005 Evolution VIII, and shop and order this OEM Mitsubishi Evo 8 license plate bracket and other genuine Mitsubishi Evo parts from evomotorparts.com today.