Description

Powerflex Front Wishbone Rear Bush Anti-Lift & Caster Adjustable – EVO 7/8/9 – PFF44-202G

Firstly, Buy Powerflex PFF44-202G Evo 7 8 9 front wishbone rear bush with anti-lift and caster adjustment. The Powerflex PFF44-202G Front Wishbone Rear Bush for EVO 7/8/9 is a performance polyurethane suspension upgrade designed to improve front-end control while adding useful caster adjustment and anti-lift geometry. Developed specifically for the Mitsubishi Lancer Evolution VII, VIII, and IX, including the Evo 260, this Powerflex bush replaces the factory rear bush in the front lower wishbone and allows approximately ±0.33° of on-car caster adjustment together with an additional 6 mm anti-lift offset.

The PFF44-202G is an excellent choice for Evo owners refreshing worn suspension components or building a more responsive street, fast-road, or track-focused chassis. Powerflex uses a polyurethane spherical bearing design with an offset stainless-steel sleeve and machined nylon cups. The assembly is pre-assembled and includes a 27 mm spanner for adjustment. Two bushes are supplied for a complete vehicle application.

Powerflex PFF44-202G Front Wishbone Rear Bush for EVO 7/8/9

The front lower wishbone is an important part of the Evo’s suspension system because it helps locate the wheel and control suspension geometry during steering, braking, acceleration, and cornering. The original rubber bush is designed to provide compliance, but aged or excessively flexible bushes can allow unwanted movement within the suspension assembly.

The Powerflex PFF44-202G Front Wishbone Rear Bush for EVO 7/8/9 uses a performance polyurethane design to provide controlled articulation while allowing the suspension geometry to be adjusted. Powerflex identifies this component as diagram position 2 and specifies MR519675 as the OEM reference number.

This makes the PFF44-202G particularly useful for enthusiasts who want to combine a suspension refresh with additional alignment adjustment rather than simply replacing the original bush with a conventional fixed replacement.

Key Features

• Genuine Powerflex performance suspension bush
• Part number PFF44-202G
• Front wishbone rear mounting position
• Anti-lift geometry
• Approximately ±0.33° caster adjustment
• Additional 6 mm anti-lift offset
• On-car caster adjustment
• Polyurethane spherical bearing construction
• Offset stainless-steel sleeve
• Machined nylon cups
• Pre-assembled design
• 27 mm adjustment spanner included
• Two bushes supplied per vehicle
• OEM reference MR519675
• Suitable for standard-travel suspension
• Available within Powerflex Road and Black Series applications

Product Specifications

Brand: Powerflex
Part Number: PFF44-202G
Product Type: Front Wishbone Rear Bush
Position: Front wishbone, rear mounting position
Application: Mitsubishi Lancer Evolution VII, VIII & IX
Additional Application: Evo 260
OEM Reference: MR519675
Caster Adjustment: ±0.33°
Anti-Lift Offset: 6 mm
Quantity Per Vehicle: 2
Suspension: Standard-travel
Construction: Polyurethane spherical bearing and offset stainless-steel sleeve
Diagram Reference: 2
Category: Mitsubishi Evo 7/8/9 Suspension & Chassis Parts

How the Anti-Lift and Caster Adjustment Works

Firstly, the PFF44-202G adds approximately 6 mm of anti-lift offset to the front suspension geometry. This is intended to help control suspension movement under braking and other high-load conditions. Powerflex specifically developed the bush with anti-lift geometry while retaining articulation through its spherical bearing design.

Secondly, the bush provides approximately ±0.33° of on-car caster adjustment. This gives the owner or alignment specialist additional flexibility when setting up the front suspension. The adjustment can be made by rotating the center sleeve, allowing the caster setting to be tailored to the vehicle and intended use.

Buy Powerflex PFF44-202G Evo 7 8 9 front wishbone rear bush with anti-lift and caster adjustment, Shop online at Evomotorparts.

Thirdly, the combination of polyurethane construction and controlled articulation helps reduce unwanted fore-and-aft movement while maintaining the movement required by the suspension. Powerflex describes the design as providing free articulation while controlling unwanted movement of the arm.

EVO 7, EVO 8 and EVO 9 Compatibility

The PFF44-202G is listed for the Mitsubishi Lancer Evolution VII, VIII, and IX, including the Evo 260, covering the relevant 2001–2007 application range. Powerflex groups these models together for this suspension component because they use the corresponding front suspension configuration.

It is suitable for a range of Evo projects, including:

• Mitsubishi Lancer Evolution VII
• Mitsubishi Lancer Evolution VIII
• Mitsubishi Lancer Evolution IX
• Mitsubishi Lancer Evolution 260
• Street-driven performance Evos
• Fast-road builds
• Track-day cars
• Competition-oriented suspension setups
• Suspension restoration and refresh projects

Always verify the exact vehicle application before ordering, particularly if the vehicle has aftermarket wishbones, altered suspension geometry, or other chassis modifications.

Suspension Performance Benefits

Replacing worn front wishbone bushes can help restore proper suspension control. The PFF44-202G goes further by providing adjustable geometry, making it useful for drivers who want to fine-tune their Evo’s chassis.

The caster adjustment can be especially useful when performing a professional alignment. Depending on the rest of the suspension setup, caster settings can influence steering characteristics, front-end geometry, and steering feel. The additional anti-lift geometry is also designed for drivers looking for more controlled suspension behavior during demanding driving.

The PFF44-202G is therefore more than a simple replacement bushing. It combines polyurethane suspension technology, caster adjustment, anti-lift geometry, and controlled articulation into one component.

Installation and Alignment

Powerflex’s installation instructions state that the original rubber bush and outer shell should be removed from the front arm before installation. The arm bore should then be cleaned and checked before the new polyurethane assembly is installed. For maximum caster adjustment, the offset sleeve is positioned toward the middle of the vehicle.

Because this product changes suspension geometry, correct installation is important. Powerflex recommends having suspension work performed by a qualified technician, checking wheel alignment after installation, and tightening fasteners to the vehicle manufacturer’s specified torque settings.

A professional four-wheel alignment is strongly recommended after installing the PFF44-202G. This allows the new caster adjustment to be set correctly and ensures the rest of the suspension geometry is checked.

Buy Powerflex PFF44-202G for EVO 7/8/9 Online

If you are looking for the Powerflex PFF44-202G for sale, this front wishbone rear bush provides a practical way to upgrade the suspension of your Mitsubishi Evo 7, Evo 8, or Evo 9. Its combination of anti-lift geometry and adjustable caster makes it particularly attractive for enthusiasts who want greater control over their front suspension setup.

When you buy online, confirm that you are selecting the correct PFF44-202G part number. Powerflex also offers the PFF44-202GBLK Black Series version, so buyers should check the series and intended driving application before ordering.

The PFF44-202G can also be combined with other suspension upgrades, including front wishbone bushes, anti-roll-bar bushes, camber adjustment hardware, dampers, springs, and other Mitsubishi Evo parts to create a properly matched chassis setup.

Frequently Asked Questions

What is Powerflex PFF44-202G?

Powerflex PFF44-202G is a front wishbone rear bush with anti-lift geometry and adjustable caster, designed for Mitsubishi Lancer Evolution 7, 8, and 9 applications.

How much caster adjustment does PFF44-202G provide?

The PFF44-202G provides approximately ±0.33° of on-car caster adjustment.

How much anti-lift offset does it provide?

The bush incorporates an additional 6 mm anti-lift offset.

How many bushes are included?

Powerflex lists two bushes per vehicle, making the supplied quantity suitable for both sides of the front suspension.

Does PFF44-202G fit the Evo 7?

Yes. Powerflex lists the PFF44-202G for Mitsubishi Lancer Evolution VII, VIII, and IX, including the Evo 260.

Does it fit the Evo 8 and Evo 9?

Yes. The PFF44-202G is specifically listed for Evo 7, Evo 8, and Evo 9 applications.

What is the OEM part number?

The OEM cross-reference listed by Powerflex is MR519675.

Is this bush suitable for standard suspension?

Yes. Powerflex states that the PFF44-202G is designed for standard-travel suspension.

Is an alignment required after installation?

Powerflex recommends checking and adjusting wheel alignment after suspension work, and its fitting instructions specifically call for alignment to be checked after installation.

Does the product include an adjustment tool?

Yes. The current design includes a 27 mm spanner for adjusting the center sleeve.

Is PFF44-202G the same as the Black Series version?

No. PFF44-202G is the standard listing, while PFF44-202GBLK is the Black Series version. Powerflex lists both for the same general Evo 7/8/9 application.

Upgrade your Mitsubishi Evolution 7, 8, or 9 suspension with the Powerflex PFF44-202G Front Wishbone Rear Bush, available to order from evomotorparts.com alongside other performance suspension and Mitsubishi Evo parts.