Description

Powerflex Black Series Front Wishbone Rear Bush – Anti-Lift & Caster Adjustable – EVO 7/8/9

Firstly, Buy Powerflex PFF44-202GBLK Evo 7 8 9 front wishbone bush with anti-lift and caster adjustment. The Powerflex Black Series Front Wishbone Rear Bush for EVO 7/8/9 is a high-performance polyurethane suspension upgrade designed for Mitsubishi Lancer Evolution VII, VIII, and IX models, including the Evo 260. Part number PFF44-202GBLK replaces the original front wishbone rear bush and adds adjustable caster together with anti-lift geometry. Developed for demanding track, competition, and performance applications, this Powerflex Black Series bush is engineered to provide greater control over front suspension movement while maintaining useful on-car adjustment.

The front lower wishbone plays an important role in controlling suspension geometry, steering response, and wheel movement. Upgrading the factory bush can help reduce unwanted movement under braking, acceleration, and cornering. The PFF44-202GBLK uses Powerflex’s Black Series compound and an offset design to provide ±0.33° of on-car caster adjustment combined with a 6 mm anti-lift offset. It is intended for standard-travel suspension and is particularly suited to performance-focused Mitsubishi Evo builds.

Powerflex Black Series Front Wishbone Rear Bush for EVO 7/8/9

The Powerflex Black Series Front Wishbone Rear Bush for EVO 7/8/9 is designed as a direct suspension component upgrade for the rear mounting position of the front wishbone. Powerflex identifies this component as diagram position 2 and lists two bushes per vehicle. The OEM reference is MR519675, making this part easy to cross-reference when planning a suspension refresh or chassis upgrade.

The Black Series version uses a 95A polyurethane compound and an offset stainless-steel sleeve with machined nylon cups. Powerflex states that the updated design uses a pre-assembled ball and cup arrangement contained within a plated metal outer shell and secured with snap rings. The supplied 27 mm spanner allows the caster adjustment to be made during installation.

Key Features

• Powerflex Black Series performance suspension bush
• Designed for Mitsubishi Lancer Evolution VII, VIII, and IX
• Fits Evo 260 applications
• Front wishbone rear mounting position
• Anti-lift geometry
• On-car caster adjustment
• Approximately ±0.33° caster adjustment
• Additional 6 mm anti-lift offset
• Black 95A polyurethane compound
• Offset stainless-steel sleeve
• Machined nylon cups
• Pre-assembled design
• 27 mm adjustment spanner included
• Two bushes required per vehicle
• OEM reference: MR519675
• Designed for standard-travel suspension
• Black Series specification for track and motorsport use

Product Specifications

Brand: Powerflex
Series: Black Series
Part Number: PFF44-202GBLK
Product Type: Front Wishbone Rear Bush
Position: Front wishbone, rear mounting position
Adjustment: Caster adjustable
Caster Range: ±0.33° on-car adjustment
Anti-Lift Offset: 6 mm
Material: Black 95A polyurethane
OEM Reference: MR519675
Quantity Per Vehicle: 2
Application: Mitsubishi Lancer Evolution VII, VIII, IX
Additional Application: Evo 260
Suspension Type: Standard-travel suspension
Use: Track, competition, motorsport, and performance applications
Category: Mitsubishi Evo 7/8/9 Suspension & Chassis Parts

Performance Benefits for Mitsubishi Evo Suspension

Firstly, the anti-lift geometry is designed to help control suspension movement under braking and other high-load conditions. This makes the PFF44-202GBLK particularly relevant to drivers who use their Evo for spirited driving, track days, or competition.

Secondly, the adjustable caster design allows the front suspension geometry to be fine-tuned on the vehicle. Powerflex specifies approximately ±0.33° of caster adjustment, giving the alignment setup additional flexibility without requiring a completely different wishbone assembly.

Thirdly, the Black Series construction is intended for applications where greater chassis control is prioritized. Powerflex describes its Black Series range as being designed for track and motorsport use and manufactured from a Black 95 Shore A compound.

The combination of polyurethane construction, spherical articulation, anti-lift geometry, and caster adjustment makes this bush particularly useful for a Mitsubishi Evo that needs more precise front-end suspension control.

EVO 7, EVO 8 & EVO 9 Compatibility

The PFF44-202GBLK is listed for Mitsubishi Lancer Evolution VII, VIII, and IX, including the Evo 260, covering the 2001–2007 application range. Powerflex groups these generations together because they share the relevant suspension configuration for this component.

This makes the bush a suitable option for Evo owners replacing aged original suspension bushes or upgrading the front suspension as part of a wider handling build. It can be combined with other Powerflex suspension components, alignment hardware, upgraded dampers, springs, anti-roll bars, and other Mitsubishi Evo parts.

Always confirm the vehicle generation and suspension configuration before ordering, particularly when purchasing components for a modified or competition vehicle.

Installation and Alignment Considerations

Powerflex installation instructions specify removing the original bush and outer shell from the front arm before cleaning the arm bore and removing sharp edges. The new bush is then installed from the top of the arm. For maximum caster adjustment, the sleeve is positioned with its offset bolt hole toward the inside of the vehicle.

Because this component changes suspension geometry, a professional installation and subsequent four-wheel alignment are strongly recommended. Powerflex advises checking and adjusting wheel alignment after suspension work and tightening fasteners to the manufacturer’s specified torque settings.

The Black Series compound is aimed at more demanding applications, so buyers should also consider their intended use when selecting between Powerflex Road Series and Black Series components. Powerflex specifically positions Black Series bushes toward track and motorsport use.

Buy Powerflex EVO 7/8/9 Suspension Parts Online

If you are looking for the Powerflex PFF44-202GBLK for sale, this front wishbone rear bush is a purpose-built upgrade for Mitsubishi Evolution 7, 8, and 9 suspension systems. Its adjustable caster function and anti-lift geometry make it especially relevant for enthusiasts who want more control over their front suspension setup.

When you buy online, always check the exact Powerflex part number and vehicle application. PFF44-202GBLK is the Black Series version, while PFF44-202G is the corresponding non-Black Series listing. Both use the same basic application and geometry, but the Black Series is intended for more demanding track and competition use.

For an Evo suspension refresh, you can also shop for complementary Mitsubishi Evo parts, including front control-arm bushes, anti-roll-bar bushes, camber hardware, and other chassis components.

Frequently Asked Questions

What is Powerflex PFF44-202GBLK?

PFF44-202GBLK is a Powerflex Black Series front wishbone rear bush with anti-lift geometry and adjustable caster, designed for Mitsubishi Lancer Evolution VII, VIII, and IX applications.

How much caster adjustment does it provide?

The bush provides approximately ±0.33° of on-car caster adjustment.

What is the anti-lift offset?

The PFF44-202GBLK incorporates an additional 6 mm anti-lift offset into its design.

How many bushes are needed for an Evo 7, 8, or 9?

Powerflex lists two bushes per vehicle for this application.

Does it fit the Evo 260?

Yes. Powerflex lists the application as Mitsubishi Lancer Evolution VII, VIII, and IX including the Evo 260.

What is the OEM reference number?

The listed OEM reference is MR519675.

Is PFF44-202GBLK suitable for track use?

Yes. It is part of Powerflex’s Black Series, which Powerflex describes as being designed for track and motorsport use.

Does the kit include an adjustment tool?

The updated design includes a 27 mm spanner for adjustment.

Does the suspension need an alignment after installation?

Yes. Because the bush provides caster adjustment and changes suspension geometry, the alignment should be checked and adjusted after installation. Powerflex recommends checking wheel alignment after suspension work.

Can I buy this Powerflex bush online?

Yes, you can order the PFF44-202GBLK online when available and use it as part of a Mitsubishi Evo 7, 8, or 9 suspension upgrade or chassis refresh.

Shop evomotorparts.com for the Powerflex Black Series Front Wishbone Rear Bush and other high-performance Mitsubishi Evo suspension parts to upgrade your Evo 7, Evo 8, or Evo 9 with greater front-end control and adjustable suspension geometry.