Description

Mishimoto Performance Intercooler – Evo X Stealth Black (MMINT-EVO-10X)

Firstly, Buy Mishimoto Performance Intercooler Evo X Stealth Black for the 4B11T. Upgrade the charge-air cooling system on your Mitsubishi Lancer Evolution X with the Mishimoto Performance Intercooler Evo X Stealth Black MMINT-EVO-10X. Designed specifically for the 2008–2015 Mitsubishi Lancer Evolution X and its turbocharged 4B11T engine, this direct-fit performance intercooler combines a large 3.5-inch-thick bar-and-plate core with cast aluminum end tanks to improve heat dissipation, airflow, and resistance to heat soak. Mishimoto states that its Evo X performance intercooler has been dyno-tested for a 10 whp and 10 tq bolt-on power increase and provides enough core volume to support vehicles producing up to 600 whp.

For Evo X owners running increased boost, upgraded turbochargers, aftermarket intercooler piping, or other performance modifications, intercooler efficiency becomes increasingly important. Higher boost levels can increase charge-air temperatures, while repeated hard driving can contribute to heat soak. The Mishimoto intercooler is engineered to provide a larger and more efficient heat-exchange surface while maintaining controlled airflow through the core.

Mishimoto Performance Intercooler Evo X Stealth Black MMINT-EVO-10X

The Mishimoto Performance Intercooler Evo X Stealth Black MMINT-EVO-10X is a direct-fit upgrade engineered around the factory Mitsubishi Lancer Evolution X chassis. Mishimoto specifies compatibility with the 4B11T engine and CZ4A chassis, making it a purpose-built intercooler rather than a universal unit requiring extensive fabrication.

The intercooler uses a 3.5-inch-thick bar-and-plate core designed to provide substantial heat transfer while maintaining low intake air temperatures. Its full cast aluminum end tanks are designed for durability and smooth airflow through the intercooler assembly.

The Stealth Black finish also gives the Evo X engine bay a clean, understated appearance while providing a performance-focused alternative to the standard silver finish. Mishimoto offers this intercooler family with powder-coated finishes in Sleek Silver and Stealth Black.

Efficient 3.5-Inch Bar-and-Plate Intercooler Core

At the center of the Mishimoto Evo X intercooler is a 3.5-inch-thick bar-and-plate core. This substantial core design provides additional surface area and internal volume for cooling compressed intake air before it enters the 4B11T engine.

A cooler, denser charge can be beneficial for turbocharged applications because intake temperature management becomes increasingly important as boost and engine output increase.

Mishimoto also uses a strategically designed fin configuration intended to promote heat exchange while minimizing pressure loss through the intercooler. This balance is important because an intercooler should provide effective cooling without unnecessarily restricting the turbocharger’s airflow path.

Cast Aluminum End Tanks and Smooth Airflow

The Mishimoto intercooler uses full aluminum cast end tanks designed for durability and consistent airflow distribution. The end tanks direct compressed air into and out of the bar-and-plate core while helping maintain a smooth charge-air path.

This construction makes the intercooler suitable for performance-oriented Evo X applications where increased boost pressure and repeated heat cycles place additional demands on the charge-air system.

Firstly, the cast aluminum construction provides a robust solution for modified vehicles.

Secondly, the large core provides increased cooling capacity compared with a smaller factory-style intercooler.

Thirdly, the engineered fin design helps balance heat exchange and pressure loss, making the intercooler suitable for both street performance and more demanding applications.

Evo X 4B11T Performance Applications

The Mishimoto performance intercooler is designed around the Mitsubishi 4B11T turbocharged engine and CZ4A chassis. It is listed for 2008–2015 Mitsubishi Lancer Evolution X applications, including GSR and MR models. Retailer fitment information also identifies the 2015 Evolution Final Edition and 2010–2011 Evolution MR Touring among compatible applications.

Typical applications include:

• Mitsubishi Lancer Evolution X GSR
• Mitsubishi Lancer Evolution X MR
• Mitsubishi Lancer Evolution X Final Edition
• Mitsubishi Lancer Evolution X MR Touring
• 4B11T turbocharged engine builds
• Street performance Evo X
• High-boost Evo X builds
• Track and autocross vehicles
• Modified turbocharger applications
• OEM intercooler replacement and performance upgrades

The intercooler can be used with stock or aftermarket intercooler piping, giving Evo X owners flexibility when building a modified charge-air system. Mishimoto notes that the supplied CNC mounting pegs must be installed by the customer.

Key Features and Benefits

The Mishimoto Evo X intercooler provides several important upgrades for turbocharged Mitsubishi applications:

• Direct-fit design for 2008–2015 Mitsubishi Lancer Evolution X
• Designed for the 4B11T engine
• CZ4A chassis application
• 3.5-inch-thick bar-and-plate intercooler core
• Full aluminum cast end tanks
• Strategic fin design for effective heat exchange
• Designed for low pressure loss
• Substantial core volume for higher-power applications
• Mishimoto claims support for vehicles up to 600 whp
• Dyno-tested 10 whp and 10 tq bolt-on power increase
• Stealth Black powder-coated finish
• Compatible with stock or aftermarket intercooler piping
• CNC mounting pegs included
• Mishimoto Lifetime Warranty

The advertised 10 whp and 10 tq improvement is a manufacturer-reported dyno result, so actual gains can vary depending on the vehicle, turbocharger, tune, ambient temperature, fuel, boost pressure, and other modifications.

Mishimoto Evo X Intercooler Specifications

• Brand: Mishimoto
• Product: Performance Intercooler
• Part Number: MMINT-EVO-10X
• Finish: Stealth Black
• Vehicle: Mitsubishi Lancer Evolution X
• Model Years: 2008–2015
• Engine: 4B11T
• Chassis: CZ4A
• Core Type: Bar-and-plate
• Core Length: 19.5 inches
• Core Height: 12 inches
• Overall Length: 28.3 inches
• Overall Height: 13.7 inches
• Overall Width: 4.5 inches
• Inlet: 2.375 inches
• Outlet: 2.5 inches
• Core Thickness: 3.5 inches
• Included: Mishimoto intercooler and CNC mounting pegs
• Warranty: Mishimoto Lifetime Warranty

Built for Modified Mitsubishi Evo X Vehicles

The factory 4B11T is highly responsive to modifications, and many Evo X owners increase performance through larger turbochargers, exhaust upgrades, intake systems, intercooler piping, fuel-system upgrades, and custom engine management.

As power and boost increase, controlling intake air temperature becomes an important part of maintaining a consistent performance setup. The Mishimoto performance intercooler provides additional core volume and cooling capacity for these applications.

Mishimoto’s own development testing included a modified 2010 Evo X GSR equipped with a Precision 6262 turbocharger, equal-length exhaust manifold, external wastegate, 3-inch turboback exhaust, 2.5-inch intercooler piping, and professional tuning.

This makes the intercooler relevant to both moderate bolt-on builds and more extensively modified 4B11T vehicles.

Installation and Compatibility

Mishimoto rates installation difficulty as medium and supplies CNC mounting pegs with the intercooler. The manufacturer specifically notes that these mounting pegs must be installed by the customer.

The intercooler can work with stock or aftermarket intercooler piping. However, owners should verify all piping, couplers, clamps, brackets, and surrounding components before installation, particularly when combining the intercooler with aftermarket turbochargers or custom charge piping.

Professional installation is recommended when the vehicle has extensive modifications or when the owner is unfamiliar with turbocharger charge-air systems.

Buy Mishimoto Evo X Intercooler Online

If you are looking for a Mishimoto Evo X intercooler for sale, this performance intercooler is designed to provide additional cooling capacity without requiring a universal intercooler fabrication project. Its direct-fit design, substantial bar-and-plate core, cast aluminum end tanks, and Stealth Black finish make it a practical upgrade for Mitsubishi Evolution X owners.

Whether you are replacing the original intercooler, building a higher-power 4B11T, upgrading an Evo X GSR or MR, or preparing a street and track vehicle, the Mishimoto intercooler provides a performance-focused charge-air cooling solution.

You can buy online and shop this intercooler alongside other Mitsubishi Evo parts, including intercooler piping, blow-off valves, turbocharger components, intake systems, exhaust parts, and engine upgrades.

Frequently Asked Questions

What Mitsubishi Evo does the Mishimoto MMINT-EVO-10X fit?

The intercooler is designed for the 2008–2015 Mitsubishi Lancer Evolution X, using the CZ4A chassis and 4B11T engine.

Is the Mishimoto Evo X intercooler a direct-fit upgrade?

Yes. Mishimoto describes it as a direct-fit intercooler engineered specifically for the Evolution X.

How thick is the Mishimoto Evo X intercooler core?

The bar-and-plate core is 3.5 inches thick.

How much power can this intercooler support?

Mishimoto states that the substantial core volume can support vehicles producing up to 600 whp. Actual suitability depends on the complete engine and turbocharger combination.

Does the intercooler improve horsepower?

Mishimoto reports a dyno-tested 10 whp and 10 tq bolt-on power increase. Actual results can vary depending on vehicle modifications and operating conditions.

Can I use stock intercooler piping?

Yes. Mishimoto states that the intercooler can be used with stock or aftermarket intercooler pipes.

Does this intercooler fit the Evo X GSR and MR?

Yes. The product is listed for Evo X applications, with fitment information covering GSR, MR, and other applicable Evolution X configurations.

Does it fit the 2015 Evo X Final Edition?

Yes. Fitment information for the black version lists the 2015 Mitsubishi Lancer Evolution Final Edition.

What is included with the intercooler?

The purchase includes one Mishimoto intercooler and CNC mounting pegs. Mishimoto also provides its Lifetime Warranty.

Is this the Stealth Black version?

Yes. Mishimoto offers this Evo X performance intercooler in a Stealth Black powder-coated finish as well as Sleek Silver. Current Mishimoto listings identify the black configuration separately, so buyers should verify the exact SKU shown on the product listing before ordering. Upgrade your 4B11T charge-air system with a substantial 3.5-inch bar-and-plate core, cast aluminum end tanks, direct-fit Evo X mounting, and Stealth Black styling designed for high-performance applications, and shop the Mishimoto Performance Intercooler from evomotorparts.com today.

Buy Mishimoto Performance Intercooler Evo X Stealth Black for the 4B11T, Shop the 3.5-inch performance intercooler online at Evomotorparts.