Description

Mitsubishi OEM Water Temperature Gauge Sensor for Evo 4–9 / 2G DSM / 3000GT — Part #MD091056

Firstly, Buy Mitsubishi OEM Water Temperature Gauge Sensor MD091056 for compatible Evo 4–9, 2G DSM and 3000GT models. The Mitsubishi OEM Water Temperature Gauge Sensor MD091056 is a genuine Mitsubishi replacement component designed to monitor engine coolant temperature and provide the appropriate signal to the vehicle’s factory temperature gauge. For Mitsubishi enthusiasts maintaining an original cooling system, replacing an aging temperature sending unit can help restore reliable temperature monitoring and preserve the factory configuration. This OEM water temperature gauge sensor is commonly associated with Mitsubishi Lancer Evolution IV through IX, selected 2G DSM applications, and Mitsubishi 3000GT models.

A functioning temperature gauge is especially important on turbocharged performance vehicles. The factory gauge gives the driver a simple way to monitor engine temperature during everyday driving, spirited use, and long-distance journeys. If the gauge is behaving unusually, the sending unit and its electrical circuit should be inspected along with the rest of the cooling system.

Mitsubishi OEM Water Temperature Gauge Sensor MD091056

The Mitsubishi OEM Water Temperature Gauge Sensor MD091056 is a temperature gauge sending unit designed to work with the factory instrumentation system on compatible Mitsubishi vehicles. Its primary purpose is to provide the temperature gauge with a coolant-temperature signal so the driver can monitor engine operating temperature from inside the vehicle.

Over many years of operation, an original temperature sender can become less reliable due to repeated exposure to engine heat and coolant. Electrical connections can also develop corrosion or contamination. These issues may contribute to an inaccurate, inconsistent, or unresponsive temperature gauge.

Replacing the sender with the correct OEM component is a practical solution when the original unit has been diagnosed as faulty. It also makes sense during an engine rebuild, restoration, or preventative maintenance project where older cooling-system components are being refreshed.

OEM Quality and Factory-Style Fitment

One of the main advantages of choosing a genuine Mitsubishi replacement is maintaining the vehicle’s original equipment configuration. The MD091056 part number provides a specific reference when searching for a replacement temperature gauge sending unit.

For Evo owners restoring a 4G63-powered vehicle, using the correct OEM component can be particularly useful when retaining factory gauges, wiring, connectors, and engine-bay components. Rather than adapting an unrelated aftermarket sender, this replacement is intended for the applications associated with the Mitsubishi MD091056 part number.

Applications for Mitsubishi Evolution, DSM and 3000GT

The MD091056 temperature gauge sensor is commonly associated with the following Mitsubishi applications:

• Mitsubishi Lancer Evolution IV
• Mitsubishi Lancer Evolution V
• Mitsubishi Lancer Evolution VI
• Mitsubishi Lancer Evolution VII
• Mitsubishi Lancer Evolution VIII
• Mitsubishi Lancer Evolution IX
• Mitsubishi 2G DSM
• Mitsubishi Eclipse GST / GSX, where applicable
• Mitsubishi 3000GT
• Mitsubishi 3000GT VR-4, where applicable

These vehicles include applications using the well-known Mitsubishi 4G63 engine platform. However, fitment can vary according to model year, engine configuration, market, and original equipment specification.

This is particularly important for international Mitsubishi owners. Evolution models and DSM vehicles were sold or imported across markets such as the United States, Japan, the United Kingdom, Canada, Australia, and Europe, and equipment can vary between markets. Always verify the MD091056 part number against your vehicle before ordering.

Product Features and Benefits

The Mitsubishi OEM Water Temperature Gauge Sensor MD091056 provides several useful benefits for compatible vehicles:

• Genuine Mitsubishi OEM replacement component
• Designed for the factory temperature gauge system
• Helps provide coolant temperature information to the dashboard gauge
• Suitable for selected Evo IV–IX applications
• Compatible with selected 2G DSM and 3000GT applications
• Useful for restoration and preventative maintenance
• Helps maintain an original-style engine bay
• Easy part-number identification with MD091056
• Suitable for street, performance, restoration, and maintenance projects

Firstly, replacing a known faulty sender can help restore proper temperature gauge operation. Secondly, using the correct OEM part helps maintain the original vehicle configuration. Thirdly, verifying the part number before installation reduces the chance of purchasing an incorrect temperature-sensing component.

Important Temperature Sensor Information

It is important to understand that a water temperature gauge sensor is not necessarily the same component as the engine coolant temperature sensor used by the ECU. The gauge sender and ECU temperature sensor can have different functions, specifications, and electrical characteristics.

If your Evo’s temperature gauge is reading too high, too low, fluctuating, or not moving, inspect the complete system before ordering a replacement. Check the sender, connector, wiring, gauge, coolant level, thermostat, and cooling system as appropriate.

Buy Mitsubishi OEM Water Temperature Gauge Sensor MD091056 for compatible Evo 4–9, 2G DSM and 3000GT models, Shop genuine Mitsubishi parts online.

A faulty temperature sender may cause inaccurate gauge readings, but replacing the sensor will not correct a problem caused by damaged wiring or another cooling-system component.

Product Specifications

Brand: Mitsubishi
Part Number: MD091056
Product Type: Water Temperature Gauge Sensor
Alternative Names: Temperature Sending Unit, Water Temperature Gauge Sender, Coolant Temperature Gauge Sender
OEM Type: Genuine Mitsubishi OEM
Function: Provides coolant temperature information for the factory temperature gauge
Applications: Selected Mitsubishi Evo IV–IX, 2G DSM, and 3000GT models
Engine Platform: Selected Mitsubishi 4G63 applications
Category: Engine Cooling System → Temperature Sensors

Before installation, compare the original part number and vehicle application to confirm compatibility.

When Should You Replace the Temperature Gauge Sensor?

A temperature gauge sensor may require replacement if the factory gauge is no longer responding correctly and testing confirms the sender is the source of the problem. Common symptoms can include an unusually low reading, an inconsistent gauge reading, or a gauge that does not respond normally as the engine warms.

However, these symptoms can have several causes. For this reason, proper diagnosis is recommended before purchasing a replacement. Inspect the electrical connector and wiring first, then verify that the cooling system is operating normally.

The MD091056 is also a useful component to consider during a larger Mitsubishi Evo restoration or 4G63 engine rebuild. Replacing aging sensors and sending units while other engine components are being serviced can help maintain a dependable factory-style setup.

Buy Mitsubishi OEM MD091056 Online

If you are looking for a Mitsubishi OEM Water Temperature Gauge Sensor MD091056 for sale, this part number provides a useful reference when searching for the correct replacement for your compatible Mitsubishi. Before you order, confirm your vehicle model, year, engine configuration, and original sensor part number.

Whether you are maintaining an Evo 4, Evo 5, Evo 6, Evo 7, Evo 8, or Evo 9, restoring a 2G DSM, or working on a compatible Mitsubishi 3000GT, choosing the correct temperature gauge sender is important for maintaining the original instrumentation system.

At evomotorparts.com, you can shop for Mitsubishi Evo parts, genuine OEM replacement components, engine parts, cooling-system components, and performance parts for your Mitsubishi project.

Frequently Asked Questions

What is Mitsubishi MD091056?

MD091056 is a Mitsubishi water temperature gauge sensor, also known as a temperature sending unit or water temperature gauge sender. It provides the signal used by the factory temperature gauge on compatible applications.

What Mitsubishi Evo models use MD091056?

The part is commonly associated with selected Mitsubishi Lancer Evolution IV, V, VI, VII, VIII, and IX applications. Exact compatibility should always be confirmed by part number and vehicle specifications.

Does MD091056 fit the Evo 8?

MD091056 is commonly listed for compatible Evo 8 applications. Verify the original part number and vehicle configuration before ordering.

Does this sensor work with a 4G63 engine?

MD091056 is associated with selected Mitsubishi 4G63 applications, including compatible Lancer Evolution and 2G DSM vehicles. Confirm the specific application before installation.

Is MD091056 the ECU coolant temperature sensor?

Not necessarily. The water temperature gauge sender is designed for the factory gauge circuit, while the ECU coolant temperature sensor serves the engine management system. These components should not be assumed to be interchangeable.

Can a faulty temperature sender cause an incorrect gauge reading?

Yes. A defective sending unit can contribute to inaccurate or abnormal gauge readings. However, wiring, electrical connections, the gauge itself, and other cooling-system components can produce similar symptoms.

How can I confirm that MD091056 is correct for my vehicle?

Compare the part number on your original sensor with MD091056 and verify the vehicle model, year, engine, and market application before placing your order.

Is this part suitable for a restoration?

Yes. A genuine Mitsubishi temperature gauge sensor can be a useful replacement when restoring a compatible Evo, DSM, or 3000GT and retaining the original factory instrumentation and engine-bay configuration. Keep your factory temperature monitoring system operating as intended with the genuine Mitsubishi OEM Water Temperature Gauge Sensor MD091056, and shop evomotorparts.com for quality Mitsubishi Evo parts for your next repair, maintenance, restoration, or 4G63 project.

Buy Mitsubishi OEM Water Temperature Gauge Sensor MD091056 for compatible Evo 4–9, 2G DSM and 3000GT models, Shop genuine Mitsubishi parts online.