Description

SPL Parts Evo X Rear Toe Arms

Firstly, Buy SPL Parts Evo X Rear Toe Arms RTA EVOX for 2008–2015 models. Upgrade the rear suspension of your Mitsubishi Lancer Evolution X with SPL Parts Evo X Rear Toe Arms. Designed for drivers who need more precise rear alignment control, these adjustable toe arms reduce unwanted bushing deflection while providing a wider range of rear toe adjustment. They are especially useful on lowered Evo X models and performance builds where changes in ride height and rear camber can affect toe settings.

The factory Evo X rear toe arms use an eccentric bolt and washer for adjustment. While this system works for a stock setup, it offers less adjustment range and precision than a dedicated adjustable toe arm. The SPL RTA EVOX replaces that factory design with a lightweight, motorsport-focused solution that gives you greater control over rear alignment.

SPL Parts Evo X Rear Toe Arms

The SPL Parts Evo X Rear Toe Arms are engineered to improve rear suspension response while making alignment adjustments easier and more precise. The main links are made from gun-drilled 2024 aluminum to reduce unnecessary weight while maintaining a strong suspension connection.

A 360-degree rotating clamp design allows quick and precise adjustment. The clamps use blue anodized titanium socket head cap screws, making them easy to access when setting the rear alignment.

For enthusiasts running aftermarket coilovers, aggressive wheel fitment, increased rear camber, or track-focused alignment settings, having sufficient toe adjustment is important. These SPL rear toe arms provide the adjustment range needed to properly dial in the rear suspension.

Precise Rear Toe Adjustment

Rear toe has a direct effect on how the vehicle tracks and responds. Even relatively small changes in ride height or rear camber can alter toe.

This is why adjustable toe arms can be valuable when modifying an Evo X suspension.

The SPL RTA EVOX allows the rear toe setting to be adjusted more precisely than the factory eccentric system. This makes the arms suitable for performance alignments, track setups, lowered street cars, and vehicles that require additional alignment range.

A properly adjusted rear toe setting can also help maintain consistent tire contact and reduce uneven tire wear when the suspension geometry has been changed.

Lightweight 2024 Aluminum Construction

SPL uses gun-drilled 2024 aluminum for the main links. The material and construction are designed to provide strength while keeping unnecessary weight under control.

Reducing unsprung weight is particularly useful in performance suspension applications. The lighter suspension components can help the suspension react more effectively to changes in the road surface.

The arms are finished in black anodizing, while the adjustment hardware features blue anodized titanium socket head cap screws for a distinctive SPL appearance.

PTFE-Lined FK Spherical Bearings

The SPL rear toe arms use FK spherical bearings and rod ends with a PTFE liner. These components are manufactured in the USA and are designed to provide smooth articulation with reduced friction.

Unlike the factory rubber-bushed setup, the spherical design minimizes unwanted bushing deflection under load. This helps maintain more consistent suspension geometry during acceleration, braking, and cornering.

The PTFE liner is also self-lubricating and self-cleaning. SPL states that its design provides a high load-carrying capacity while maintaining suitable characteristics for both street and track applications.

2008–2015 Mitsubishi Evo X Fitment

These rear toe arms are designed specifically for the Mitsubishi Lancer Evolution X platform. SPL lists the application as 2008–2016 Mitsubishi EVO X, while multiple Evo parts retailers list the primary fitment as 2008–2015 Mitsubishi Evo X.

For your product listing, the commonly used 2008–2015 fitment is appropriate:

• 2008 Mitsubishi Lancer Evolution X
• 2009 Mitsubishi Lancer Evolution X
• 2010 Mitsubishi Lancer Evolution X
• 2011 Mitsubishi Lancer Evolution X
• 2012 Mitsubishi Lancer Evolution X
• 2013 Mitsubishi Lancer Evolution X
• 2014 Mitsubishi Lancer Evolution X
• 2015 Mitsubishi Lancer Evolution X

Always verify the exact vehicle configuration before ordering when building a modified suspension system.

Designed for Street and Track Builds

The SPL RTA EVOX is not limited to dedicated race cars. Its adjustable design can benefit both street-driven and track-focused Evo X builds.

Firstly, the increased adjustment range is useful for lowered vehicles where the factory toe adjustment may no longer provide enough range.

Secondly, the spherical rod ends help reduce suspension movement caused by soft rubber bushings. This can provide a more consistent connection between the suspension components.

Thirdly, the precise adjustment system makes it easier to establish and maintain a specific rear alignment setup.

For a street car, this can be useful when correcting alignment after suspension modifications. For a track car, it can provide the adjustment needed to fine-tune the rear suspension for a particular setup.

Features

The SPL Parts Evo X Rear Toe Arms include:

• SPL RTA EVOX rear toe arms
• Gun-drilled 2024 aluminum main links
• Black anodized finish
• 6061-T6 aluminum rotating clamp design
• Blue anodized titanium socket head cap screws
• PTFE-lined FK spherical bearings and rod ends
• Increased rear toe adjustment range
• Reduced bushing deflection
• Made in the USA
• Sold as a pair

The package also includes the necessary installation hardware.

Why Upgrade the Evo X Rear Toe Arms?

The factory rear toe system was designed for the original vehicle configuration. Once an Evo X receives lowering springs, coilovers, different wheels, increased rear camber, or a more aggressive alignment, additional adjustment range can become useful.

The SPL rear toe arms provide a more precise alternative to the factory eccentric system. Their spherical construction helps keep the suspension geometry more consistent under load, while the rotating clamp makes adjustments straightforward.

This makes them a strong choice for Evo X owners who want greater control over rear alignment without relying entirely on the limitations of the OEM toe adjustment system.

SPL Evo X Rear Toe Arms FAQ

What is the part number?

The SPL Parts part number is SPL RTA EVOX.

Do these fit the Mitsubishi Evo X?

Yes. SPL lists the RTA EVOX for the Mitsubishi Evolution X platform. Retailers commonly list the fitment as 2008–2015 Evo X.

Are the toe arms adjustable?

Yes. The SPL RTA EVOX provides an increased range of rear toe adjustment compared with the factory eccentric system.

Are they sold individually?

No. The SPL Evo X Rear Toe Arms are sold as a pair.

Are they suitable for a lowered Evo X?

Yes. The increased adjustment range is particularly useful for lowered vehicles and performance alignment setups.

Are these street or track parts?

They can be used for both street and track applications. The PTFE-lined spherical bearings are designed for reliable operation in either type of build.

Do I need an alignment after installation?

Yes. Because these arms change the rear toe adjustment, a professional four-wheel alignment is recommended after installation.

What is the difference between RTA and RTAEL?

The RTA EVOX is the adjustable rear toe arm kit. The RTAEL EVOX combines the rear toe arms with SPL’s toe eccentric lockout system. The lockout system replaces the factory eccentric adjustment hardware to help prevent alignment movement under high loads. If you are upgrading the rear suspension of your Evo X and need greater alignment control, the SPL Parts Evo X Rear Toe Arms provide a lightweight, precise, and performance-focused solution for dialing in rear toe, so you can buy online from evomotorparts.com and upgrade your Mitsubishi Evo X suspension with confidence.

Buy SPL Parts Evo X Rear Toe Arms RTA EVOX for 2008–2015 models, Shop adjustable rear toe arms and Mitsubishi Evo suspension parts online.