Description

STM License Plate Light Mount for Mitsubishi Evo 9 JDM Rear Bumper

Firstly, Buy STM License Plate Light Mount Evo 9 JDM online. Installing a JDM rear bumper on an Evo 9 can create a simple but important problem: the factory USDM license plate lights no longer have the correct mounting location. The STM License Plate Light Mount Evo 9 JDM solves that problem with a simple, durable mounting solution.

Designed for the 2006 Mitsubishi Lancer Evolution IX JDM rear bumper, this STM bracket allows you to reuse your factory USDM license plate lights. It provides a clean mounting point and helps keep the plate properly illuminated. The mount is made from stainless steel, so it is resistant to rust and corrosion.

The STM part number is STM-CT9-PLB. It is made in the USA by STM and comes with the required stainless mounting hardware.

STM License Plate Light Mount Evo 9 JDM

The JDM Evo 9 rear bumper does not provide the same license plate light mounting provision found on the USDM bumper. Because of this, installing a JDM bumper on a USDM Evo 8 or Evo 9 can leave the original license plate lights without a proper mounting location.

The STM-CT9-PLB was designed specifically for this situation.

Instead of creating a custom bracket, you can use this purpose-built STM mount to install your existing USDM license plate lights. This creates a cleaner solution and makes the conversion easier to complete.

Designed for the JDM Evo 9 Rear Bumper

The STM mount is designed for the 2006 Evolution IX JDM rear bumper.

It is a useful addition when converting a USDM car to the JDM rear bumper setup. It can also be useful during a rear-end restoration where the original license plate light bracket is missing or damaged.

The bracket works with the factory USDM license plate lights. The lights themselves are not included with the STM mount.

Stainless Steel Construction

Durability is one of the main advantages of this mount.

STM manufactures the mounting components from stainless steel. This helps protect the bracket and hardware from rust and corrosion. That is especially useful on a rear exterior application where the hardware can be exposed to moisture and road conditions.

The stainless construction also gives the mount a clean appearance behind the license plate.

For an Evo that sees regular street use, this is a practical upgrade. It is also a good choice for a clean JDM conversion where long-term durability matters.

Reuse Your Factory USDM License Plate Lights

One of the best features of the STM bracket is that it allows you to reuse your existing USDM license plate lights.

You do not need to replace the entire lighting system just because you installed a JDM rear bumper.

This makes the conversion simpler. It can also reduce the number of additional parts you need to source.

The factory lights connect to the vehicle’s existing wiring. The STM mount simply provides the proper physical mounting solution for the lights.

Current STM listings also offer genuine Mitsubishi replacement license plate lights separately if your original units are damaged or missing.

Simple Installation

Installation is straightforward, but some modification is required.

STM notes that the factory license bracket needs to be cut and removed. A cutoff wheel is recommended for this step. Once the original bracket has been removed, the STM mount uses an existing bolt hole for installation.

Because cutting is involved, take your time during installation.

First, confirm the mounting location.

Secondly, remove the unnecessary portion of the factory bracket.

Thirdly, install the STM mounting bar using the existing mounting point and supplied stainless hardware.

A proper test fit before final tightening is recommended. This helps ensure that the license plate lights are positioned correctly and provide proper illumination.

What’s Included

The STM-CT9-PLB includes the components needed to install the mounting bar.

The package includes:

• 1 × STM mounting bar with knurled nut
• 1 × M6x16 stainless nut
• 1 × M6x16 stainless flat washer

The factory USDM license plate lights are not included. They can be reused from your existing bumper or purchased separately.

Lightweight Design

The STM mount is also very lightweight.

The listed weight is approximately 3.35 ounces, or 0.21 pound.

That makes it an easy addition to a lightweight Evo build. More importantly, it provides the mounting function you need without adding unnecessary bulk.

Why Use the STM License Plate Light Mount?

Firstly, it solves a common problem when installing a JDM Evo 9 rear bumper on a USDM car.

Secondly, it lets you reuse the factory USDM license plate lights. This keeps the lighting setup simple.

Thirdly, the stainless-steel construction provides excellent resistance to rust and corrosion.

The bracket is also made specifically for the application. You do not have to rely on a homemade metal bracket or improvised mounting solution.

For enthusiasts who want a clean JDM rear conversion, that makes the STM mount a practical upgrade.

Important Fitment Information

The STM-CT9-PLB is listed for the 2006 Mitsubishi Evolution IX JDM rear bumper.

This product is intended for the license plate light mounting issue created by the JDM bumper design.

If your car uses a different rear bumper or aftermarket bumper support, verify the mounting configuration before ordering. STM also offers a separate Evo 8/9 rear bumper support bar that fits both USDM Evo 8/9 and the JDM Evo 9 rear bumper.

Key Features

• STM license plate light mounting bracket
• Part number STM-CT9-PLB
• Designed for the 2006 Evo 9 JDM rear bumper
• Allows use of factory USDM license plate lights
• Stainless-steel construction
• Stainless mounting hardware
• Lightweight design
• Approximately 3.35 oz
• Made in the USA by STM
• Uses an existing mounting hole
• Lifetime STM warranty against manufacturing defects for the original purchaser
• Professional installation recommended

Frequently Asked Questions

What does the STM-CT9-PLB do?

The STM-CT9-PLB provides a mounting location for USDM license plate lights when using a JDM Evo 9 rear bumper.

What Evo does this bracket fit?

STM lists it for the 2006 Mitsubishi Evolution IX JDM rear bumper.

Can I reuse my factory USDM license plate lights?

Yes. The bracket is specifically designed to allow you to install the factory USDM license plate lights.

Are the license plate lights included?

No. The STM mount includes the mounting bar and stainless hardware. The license plate lights are separate.

What material is the bracket made from?

The STM mounting components are made from stainless steel. This provides strong corrosion resistance for long-term use.

Does installation require cutting?

Yes. STM states that the factory license bracket must be cut and removed before installing the new mount.

Does the mount require drilling?

STM’s installation notes state that the new bracket uses an existing bolt hole. Therefore, the basic installation does not require creating a new mounting hole.

Is the STM mount covered by a warranty?

Yes. STM lists a lifetime warranty against manufacturing defects for the original purchaser.

Can I use this with an STM rear bumper support?

The STM rear bumper support is separately designed to fit both USDM Evo 8/9 and JDM Evo 9 rear bumpers and provides a mounting point for a USDM plate on a JDM rear bumper. If you are converting your CT9A to a JDM Evo 9 rear bumper and want a clean way to reuse your factory license plate lights, the STM License Plate Light Mount Evo 9 JDM STM-CT9-PLB provides a lightweight stainless-steel solution designed for this exact application, so shop and order your STM Evo 9 license plate light mount and other Mitsubishi Evo parts from evomotorparts.com today.