Description

Mitsubishi Rear Transfer Case Output Seal for Evo X

Firstly, Buy Evo X OEM Rear Transfer Case Output Seal 3200A105 online for 2008–2015 models. The Mitsubishi Rear Transfer Case Output Seal for Evo X is a genuine Mitsubishi OEM replacement seal designed to seal the rear output of the transfer case where it connects to the driveshaft. This seal is an important component of the Mitsubishi Lancer Evolution X AWD drivetrain because it helps retain transfer-case fluid and prevent leakage around the rear output shaft.

The OEM Mitsubishi part number for this rear transfer-case output seal is 3200A105, with Mitsubishi PNC reference 30384. Evo-specific OEM parts suppliers list this seal for the 2008–2015 Mitsubishi Lancer Evolution X, including both 5-speed manual and SST-equipped models.

For Evo X owners replacing a leaking transfer-case seal, servicing the AWD drivetrain, rebuilding a transfer case, or restoring a vehicle with genuine Mitsubishi components, the 3200A105 provides the correct OEM replacement for the rear transfer-case output location.

Evo X OEM Rear Transfer Case Output Seal

The rear output of the Evo X transfer case is connected to the driveshaft and requires a properly functioning oil seal to contain the transfer-case lubricant. Over time, an original seal can become worn, hardened, or damaged, potentially allowing fluid to escape around the output shaft.

The 3200A105 is specifically designed for this application. Mitsubishi parts references identify it as the rear transfer-case output seal, while Evo X specialists describe it as the transfer-case output seal to driveshaft.

Firstly, using the correct OEM seal ensures the replacement is matched to the intended transfer-case application.

Secondly, replacing a worn seal can help address fluid leakage around the rear output area.

Thirdly, using the genuine Mitsubishi part number makes it easier to identify the correct seal instead of relying on an incorrectly sized universal replacement.

Genuine Mitsubishi OEM Construction

The 3200A105 is a genuine Mitsubishi factory replacement component. It is cataloged specifically for the Evolution X transfer-case rear output and is sold individually.

This is important because the Evo X transfer case contains several different sealing locations. The rear driveshaft output seal should not be confused with the front axle/output seals or the transfer-case input O-ring.

For example, 3200A144 is associated with the transfer-case input shaft sealing area, while 3200A105 is the rear transfer-case output seal to the driveshaft.

Buy Evo X OEM Rear Transfer Case Output Seal 3200A105 online for 2008–2015 models, Genuine Mitsubishi seal for the rear driveshaft output.

Using the correct Mitsubishi part number helps ensure the appropriate seal is selected for the intended location.

Product Specifications

• Brand: Mitsubishi
• Part Number: 3200A105
• PNC: 30384
• Product Type: Transfer case rear output oil seal
• Application: Mitsubishi Lancer Evolution X
• Chassis: CZ4A
• Model Years: 2008–2015
• Drivetrain: AWD
• Location: Rear transfer-case output / driveshaft connection
• Quantity: 1 seal
• Type: Genuine Mitsubishi OEM replacement
• Compatible Transmissions: 5-speed manual and SST applications
• Primary Function: Seals transfer-case rear output shaft and helps retain fluid

Evo-specific parts suppliers list the 3200A105 for the 2008–2015 Evolution X and identify it as the rear transfer-case output seal to driveshaft.

Transfer Case to Driveshaft Sealing

The rear output shaft of the transfer case rotates while transmitting power through the AWD drivetrain. The oil seal sits around this output area and provides a sealing surface around the rotating shaft.

When the seal becomes worn, fluid may begin to escape around the driveshaft connection. A leak in this area can leave fluid residue around the transfer case and driveshaft and may become more noticeable after driving.

During transfer-case service, it is therefore worthwhile to inspect the rear output seal carefully. If there are signs of leakage, deterioration, or damage, replacing the seal can be part of the overall transfer-case service.

The 3200A105 is specifically cataloged for this rear output application.

When Should the 3200A105 Be Replaced?

The rear transfer-case output seal may require replacement when:

• Fluid is leaking from the rear transfer-case output
• The transfer case is being removed
• The driveshaft has been removed
• The transfer case is being rebuilt
• The original seal is visibly damaged
• The seal has become hardened or deteriorated
• An AWD drivetrain restoration is being performed
• A replacement transfer case is being installed
• Preventive sealing work is being completed during major drivetrain service

Replacing the seal during appropriate transfer-case service can be especially practical when the driveshaft and transfer case are already accessible.

Evo X 5-Speed and SST Applications

One useful feature of this particular seal is that Evo-specific suppliers list the 3200A105 for both 5-speed manual and SST Evolution X models. This is different from some internal transfer-case components that vary between drivetrain configurations.

This makes the 3200A105 a useful OEM replacement when servicing the rear output area on applicable Evo X transfer cases.

However, as with any Mitsubishi OEM component, checking the part number against the vehicle VIN or transfer-case configuration is recommended before ordering, particularly if the vehicle has a swapped drivetrain or modified transfer case.

Difference Between Evo X Transfer Case Seals

The Evolution X transfer case uses multiple sealing components, and identifying the correct location is important.

The 3200A105 is the rear transfer-case output seal to the driveshaft. The 3200A144 is an O-ring associated with the transfer-case input/gearbox mating area, while 3200A145 is associated with the front axle/transmission output location on the Evo X.

Therefore, if the leak is specifically coming from the rear of the transfer case where the driveshaft connects, 3200A105 is the relevant OEM part number to investigate.

Benefits of Genuine Mitsubishi OEM Seals

Choosing a genuine Mitsubishi seal is particularly useful for Evo X owners who want to maintain the factory drivetrain configuration.

Key benefits include:

• Genuine Mitsubishi OEM specification
• Correct application for the Evo X transfer case
• Factory-style sealing component
• Direct replacement for the specified location
• Useful for transfer-case rebuilds
• Suitable for OEM restoration
• Helps address output-shaft fluid leakage
• Available by exact Mitsubishi part number

Using the correct seal is also preferable to selecting a generic seal based solely on approximate dimensions, especially when working on a specialized AWD drivetrain.

Buy Mitsubishi Evo X Transfer Case Parts Online

The rear transfer-case output seal is a small component, but it performs an important function in maintaining the integrity of the Evo X AWD drivetrain. When a transfer case begins leaking around the driveshaft output, the correct OEM replacement can help restore the intended sealing arrangement.

Whether you are rebuilding a transfer case, replacing a driveshaft, servicing the AWD system, repairing a fluid leak, or restoring an Evolution X to factory specification, the Mitsubishi 3200A105 is the OEM reference for the rear transfer-case output seal.

At evomotorparts.com, you can shop genuine Mitsubishi Evo X transfer-case components, drivetrain seals, transfer-case bolts, O-rings, ACD components, transmission parts, and other OEM Mitsubishi Evo parts.

Frequently Asked Questions

What is Mitsubishi part number 3200A105?

3200A105 is the genuine Mitsubishi OEM rear transfer-case output seal for the Evolution X. It seals the transfer-case output where the driveshaft connects. It is associated with Mitsubishi PNC 30384.

Does 3200A105 fit the Evo X?

Yes. OEM Evo X parts suppliers list 3200A105 for 2008–2015 Mitsubishi Lancer Evolution X models.

Is 3200A105 for the rear of the transfer case?

Yes. It is the rear transfer-case output seal to driveshaft, located at the rear output of the transfer case.

Does it work with the Evo X SST?

Evo-specific suppliers list 3200A105 for both 5-speed manual and SST Evo X models.

Is 3200A105 a genuine Mitsubishi part?

Yes. It is listed as a genuine OEM Mitsubishi factory replacement transfer-case output seal.

How many seals are included?

The part is sold as one rear transfer-case output seal.

What are the symptoms of a bad transfer-case output seal?

A common indication is fluid leakage around the rear transfer-case output and driveshaft connection. During transfer-case or driveshaft service, the seal should also be inspected for wear or damage.

Is 3200A105 the same as 3200A144?

No. 3200A144 is the transfer-case input shaft O-ring/seal associated with the gearbox-to-transfer-case area, while 3200A105 is the rear transfer-case output seal to the driveshaft.

Conclusion

The Mitsubishi Rear Transfer Case Output Seal for Evo X (3200A105) is a genuine Mitsubishi OEM rear output seal designed to seal the transfer case where it connects to the driveshaft on 2008–2015 Evolution X models, including applicable 5-speed manual and SST configurations, making it an important replacement for transfer-case leaks, AWD drivetrain servicing, rebuilds, and OEM restoration projects, and you can shop and order genuine Mitsubishi Evo X parts from evomotorparts.com.

Buy Evo X OEM Rear Transfer Case Output Seal 3200A105 online for 2008–2015 models, Genuine Mitsubishi seal for the rear driveshaft output.