Description

Mitsubishi Lancer Evolution X Brembo Rear Left Brake Disc and Bell Assembly

Firstly, Shop the Evo X rear left brake disc and bell assembly by Brembo. The Evo X rear left brake disc is an essential component for maintaining reliable braking performance on your Mitsubishi Lancer Evolution X. This Brembo rear brake disc and bell assembly is designed for the left-hand side of the vehicle and is intended for compatible Brembo racing brake applications. It is a replacement option for owners who need to maintain their braking system for road-course driving, motorsport use, or vehicle restoration.

The brake disc works with the brake caliper and pads to convert kinetic energy into heat, helping the vehicle slow down safely. The bell connects the disc to the hub assembly. Using the correct disc and bell combination is important for proper alignment, secure mounting, and consistent braking performance.

Before ordering, confirm that this assembly matches your existing brake kit. Brembo offers different brake configurations for the Evo X, and this disc-and-bell assembly should not be confused with the standard factory rear brake rotor. <Link url=”https://www.arnsidemotorsport.co.uk/product/evo-x-brembo-rear-disc-bell-assy-tarmac-gravel/” title=”The specialist product listing”/> identifies the racing assembly as a Tarmac/Gravel application supplied individually.

Evo X Rear Left Brake Disc: Key Features

This Brembo assembly is intended for compatible Mitsubishi Lancer Evolution X racing brake systems. Its main features include:

• Left-side fitment: Designed for the left-hand rear position in the specified brake configuration.
• Disc and bell assembly: Combines the brake disc with its mounting bell.
• Brembo engineering: Suitable for the specific motorsport brake application for which the assembly was developed.
• Tarmac and gravel applications: Associated with compatible Evo X racing brake kits.
• Individual replacement: Supplied as a single assembly rather than a complete rear axle set.

These features make it important to match the replacement component to the existing hardware. The correct assembly helps maintain the intended disc position and compatibility with the brake caliper.

Brembo Rear Brake Disc and Bell Assembly Specifications

Review the following product details before purchasing.

Specification	Details
Product type	Rear brake disc and bell assembly
Vehicle platform	Mitsubishi Lancer Evolution X
Chassis code	CZ4A
Brake position	Rear left
Manufacturer	Brembo
Application	Compatible Tarmac/Gravel racing brake systems
Assembly type	Disc with mounting bell
Reference part number	XA7.G0.23
Quantity	One assembly, subject to supplier confirmation

Important: The reference number above is associated with the left-hand rear disc assembly in the relevant Brembo racing catalogue. Confirm the exact part number, disc dimensions, and mounting arrangement with the seller before placing an order. This is especially important if your Evo X has a standard factory braking system or an aftermarket big-brake conversion.

Benefits of the Evo X Rear Left Brake Disc

1. Supports Consistent Braking Performance

The rear brake disc provides the friction surface required for the brake pads to slow the vehicle. A correctly matched replacement helps restore the braking system when the existing disc is worn, damaged, or unsuitable for continued use.

Disc condition matters during demanding driving. Excessive wear, cracking, or uneven surfaces can affect braking consistency. Inspect the caliper, pads, mounting hardware, and opposite-side disc when replacing a brake assembly.

2. Maintains Correct Disc and Bell Fitment

The bell is an important part of a compatible disc assembly. It connects the disc to its mounting point and helps establish the intended position relative to the caliper.

Choosing the correct assembly helps avoid fitment problems caused by incorrect disc offsets, mounting patterns, or dimensions. Do not assume that all Mitsubishi Evo X rear rotors are interchangeable simply because they fit the same chassis.

3. Suitable for Specific Motorsport Brake Configurations

The Evo X has several brake options, including standard equipment and upgraded racing systems. This Brembo disc and bell assembly is associated with a dedicated Tarmac/Gravel competition application.

For track-focused vehicles, matching the replacement component to the original brake kit is particularly important. Different disc diameters, thicknesses, bells, and caliper arrangements can require different parts.

Mitsubishi Evo X Brake Disc Compatibility

The Mitsubishi Lancer Evolution X uses the CZ4A chassis and a turbocharged 4B11T engine. However, engine and chassis identification alone cannot confirm compatibility with this particular brake assembly.

Standard Evo X rear brakes commonly use a ventilated disc measuring approximately 330 mm in diameter and 22 mm thick, depending on the vehicle specification. The Brembo racing assembly referenced here belongs to a different application, with a listed racing disc size of 295 × 25.4 mm.

For that reason, check your vehicle’s existing brake configuration before purchasing. Compare the disc dimensions, bell design, mounting points, and Brembo part number. If the car has been modified, use the specifications of the installed brake kit rather than relying only on its model year.

Installation and Maintenance Recommendations

Brake components are safety-critical. Installation should be performed by a qualified mechanic or an experienced technician familiar with the applicable Brembo brake system.

Firstly, inspect the existing brake assembly and verify the replacement part number before removing any components.

Secondly, check the brake pads, caliper, mounting hardware, and wheel hub for wear or damage. Clean the mounting surfaces and follow the manufacturer’s installation specifications.

Thirdly, verify disc alignment and clearance before completing the installation. Check the brake system for proper operation and follow the recommended bedding procedure for the brake pads and discs.

Never reuse a damaged mounting bell or install a disc that does not meet the specifications of the intended brake kit. If you notice cracking, excessive wear, or unusual vibration, have the complete braking system inspected.

Frequently Asked Questions

Is this brake disc compatible with every Mitsubishi Evo X?

No. The assembly is associated with a specific Brembo racing brake application. Standard factory brakes and aftermarket brake kits may require different rotors. Confirm the part number and dimensions before ordering.

Is the assembly for the left or right rear wheel?

This listing specifies the rear left side. Brembo’s racing catalogue identifies XA7.G0.23 as the left-hand rear disc assembly and XA7.G0.24 as the corresponding right-hand assembly for the referenced application.

Does the product include the mounting bell?

The product is described as a disc and bell assembly. Confirm the supplied components with the seller before purchase, particularly if you need additional mounting hardware.

Can I use this assembly with factory Evo X Brembo calipers?

Do not assume compatibility. The assembly is associated with a dedicated racing configuration. Check the caliper, disc dimensions, mounting arrangement, and brake-kit specifications before fitting it to a factory-equipped vehicle.

Should I replace both rear brake discs?

Brake disc replacement requirements depend on the condition of the existing components and the manufacturer’s recommendations. Inspect both sides and maintain a suitable, compatible setup across the rear axle. Follow the applicable brake-system service instructions.

What should I check before buying?

Confirm the exact Brembo part number, left-side orientation, disc dimensions, bell configuration, and brake-kit application. If you are unsure, provide your vehicle details and photographs of the existing assembly to a specialist.

Order Mitsubishi Evo X Brake Parts

Choosing the correct replacement brake components helps maintain braking safety and the intended performance of your Mitsubishi Lancer Evolution X. This Brembo rear left brake disc and bell assembly is a specialist option for compatible racing brake systems, rather than a universal replacement for every Evo X. When shopping for Mitsubishi Evo parts at Evomotorparts.com, verify fitment carefully and select components that match your vehicle’s current setup. Confirming the application before ordering can help prevent installation delays and ensure you receive the right brake assembly for your car.

Shop the Evo X rear left brake disc and bell assembly by Brembo, Check racing brake fitment, specifications, and compatibility before ordering.