Description

Mitsubishi OEM Driveshaft Bolt for Evo X (MB505065)

Firstly, Buy Mitsubishi OEM Driveshaft Bolt for Evo X MB505065 online. Keep your Mitsubishi Lancer Evolution X drivetrain properly secured with the Mitsubishi OEM Driveshaft Bolt for Evo X MB505065. This genuine Mitsubishi replacement bolt is designed for propeller shaft applications on the Evo X and provides an OEM-spec solution when replacing missing, damaged, worn, or previously removed driveshaft hardware. For owners restoring an Evolution X, servicing the AWD drivetrain, or replacing factory fasteners during a driveshaft removal, using the correct Mitsubishi hardware helps maintain proper fitment and assembly.

The Mitsubishi OEM Driveshaft Bolt for Evo X MB505065 is identified by Mitsubishi as a Bolt, Propeller Shaft and is listed for the Lancer Evolution X CZ4A platform. The bolt is an M10x28 fastener and is sold individually, making it suitable when you need a single replacement rather than purchasing an entire hardware kit.

Mitsubishi OEM Driveshaft Bolt for Evo X MB505065

The propeller shaft is an important part of the Evolution X AWD drivetrain. It transfers rotational power through the drivetrain toward the rear differential, so its mounting hardware must be correctly fitted and securely tightened. The MB505065 bolt is designed specifically for Mitsubishi propeller shaft applications and provides an OEM replacement for the corresponding factory fastener.

This is not a generic hardware-store bolt being marketed as an Evo part. MB505065 is a genuine Mitsubishi OEM part number, with Mitsubishi parts sources identifying it as a propeller shaft bolt.

OEM M10x28 Propeller Shaft Bolt

The MB505065 driveshaft bolt is specified as M10x28. This makes it important to use the correct replacement when servicing the Evo X propeller shaft because drivetrain fasteners should match the original application in size and design.

STM Tuned lists MB505065 as the factory replacement driveshaft bolt for the 2008–2015 Mitsubishi Evolution X CZ4A and identifies eight of these bolts in its referenced propeller-shaft diagram. The same bolt is also included in the OEM driveshaft-to-rear-differential hardware kit, where four MB505065 bolts are supplied together with the corresponding washers and nuts.

Because hardware quantities can depend on the specific assembly being serviced, always confirm the required quantity and exact installation location against the vehicle’s parts diagram or service information.

Why Replace the Evo X Driveshaft Bolt?

Driveshaft hardware is exposed to the demanding conditions associated with an AWD performance drivetrain. During drivetrain service, bolts may become damaged, corroded, misplaced, or unavailable after previous repairs. Replacing questionable hardware with genuine Mitsubishi components is a practical way to return the assembly closer to its original specification.

Firstly, the OEM part number provides a straightforward way to identify the correct replacement hardware.

Secondly, the M10x28 specification is designed for the applicable Mitsubishi propeller shaft installation rather than requiring you to adapt a generic fastener.

Thirdly, buying individual MB505065 bolts is useful when only specific fasteners need replacement during a drivetrain repair or restoration.

Whether you are replacing a damaged bolt, rebuilding the driveshaft assembly, installing a replacement propeller shaft, or refreshing drivetrain hardware during maintenance, this OEM Mitsubishi fastener is a useful replacement part for the Evolution X.

Applications and Fitment

The Mitsubishi OEM MB505065 driveshaft bolt is associated with the Mitsubishi Lancer Evolution X / Evolution 10, chassis CZ4A, using the 4B11T drivetrain. OEM parts sources list the part for Evolution X production applications, including 2008–2015 models.

Vehicle Application

• Make: Mitsubishi
• Model: Lancer Evolution X / Evolution 10
• Chassis: CZ4A
• Engine Platform: 4B11T
• Model Years: 2008–2015
• Component: Propeller Shaft / Driveshaft
• Part Number: MB505065
• Bolt Size: M10x28
• Condition: Genuine OEM replacement
• Quantity: Sold individually

Always verify the part number against your vehicle identification number, parts catalog, or the original hardware before ordering. Mitsubishi parts suppliers also recommend confirming compatibility because vehicle specifications and production configurations can vary.

Evo X Driveshaft and AWD Drivetrain Service

The Evolution X uses an AWD drivetrain, making the propeller shaft an important component in transferring power through the vehicle. When removing or reinstalling the driveshaft, attention to the associated mounting hardware is essential. A missing or damaged fastener should not simply be ignored because the propeller shaft is part of a rotating drivetrain assembly.

The Mitsubishi OEM Driveshaft Bolt MB505065 is therefore a useful addition to an Evo X drivetrain rebuild, maintenance job, restoration project, or replacement hardware order. It can also be purchased alongside other OEM drivetrain components when completing a more comprehensive propeller shaft service.

For customers replacing the complete driveshaft-to-rear-differential hardware, Mitsubishi OEM hardware kits may combine MB505065 bolts with the appropriate lock washers and nuts. However, if you only need replacement bolts, the individual MB505065 listing allows you to order the required number separately.

Benefits of Genuine Mitsubishi MB505065

Choosing genuine OEM hardware offers several advantages for an Evo X restoration or repair:

• Genuine Mitsubishi OEM part number MB505065
• Designed for propeller shaft applications
• M10x28 specification
• Direct replacement for the applicable factory fastener
• Suitable for 2008–2015 Evolution X CZ4A applications
• Ideal for driveshaft and AWD drivetrain service
• Useful for restoration and OEM-spec builds
• Sold individually for convenient replacement
• Compatible with the original Mitsubishi drivetrain design

This part is particularly useful for enthusiasts who want their Evo X to retain factory-style components instead of substituting unknown aftermarket hardware.

Order Mitsubishi OEM Driveshaft Bolt MB505065 Online

If you are looking for a Mitsubishi OEM Driveshaft Bolt for Evo X, MB505065 is the genuine Mitsubishi part number to look for. Its M10x28 specification and propeller shaft application make it a practical replacement for the corresponding factory driveshaft fastener on applicable Evolution X models.

Before placing your order, confirm your vehicle’s year, chassis, drivetrain configuration, and required quantity. If you are replacing multiple driveshaft fasteners, consider checking the complete hardware arrangement so that the correct bolts, washers, and nuts are used together. Whether you are maintaining a street-driven Evo X, rebuilding an AWD drivetrain, completing a restoration, or replacing missing factory hardware, the Mitsubishi OEM Driveshaft Bolt MB505065 provides a genuine OEM replacement solution. Shop genuine Mitsubishi Evo parts at evomotorparts.com and order the correct driveshaft hardware for your Evolution X drivetrain.

Buy Mitsubishi OEM Driveshaft Bolt for Evo X MB505065 online, Genuine M10x28 propeller shaft bolt for 2008–2015 Evolution X models.