Description

Mitsubishi OEM Eyebolt M14x27 for DSM/Evo — Part #MF650114

Firstly, Buy Mitsubishi OEM Eyebolt M14x27 MF650114 for DSM and Evo turbo water lines. The Mitsubishi OEM Eyebolt M14x27 for DSM/Evo MF650114 is a genuine Mitsubishi factory replacement fastener designed for turbocharger and cooling-water line connections on a wide range of Mitsubishi performance applications. Also identified by Mitsubishi as an eyebolt for the cooling water line, MF650114 features an M14 × 27 mm specification with a 1.5 mm thread pitch. It is commonly used with turbocharger water-feed or water-line assemblies where a banjo-style connection requires the correct OEM eyebolt.

For Mitsubishi Evolution and DSM owners, this small but important piece of hardware is useful when replacing a damaged, missing, corroded, or previously substituted turbo coolant-line bolt. Using the correct OEM eyebolt helps maintain the intended thread size and connection configuration while allowing the associated water line to be securely fastened.

MF650114 is listed for Mitsubishi Evolution models spanning Evolution I through Evolution X, as well as 1G DSM, 2G DSM, and other Mitsubishi applications. Because the exact installation location can vary between generations, checking the vehicle’s parts diagram or VIN is recommended before ordering.

Mitsubishi OEM Eyebolt M14x27 MF650114

The Mitsubishi OEM Eyebolt M14x27 MF650114 is manufactured for a specific Mitsubishi fluid-line application rather than being a generic hardware-store bolt. Its eyelet-style head allows the corresponding banjo or fluid-line fitting to be secured directly to the engine or turbocharger cooling system.

The correct eyebolt is particularly important on turbocharged applications because coolant lines operate in a high-temperature environment and must maintain a secure connection. A damaged or incorrect bolt can make proper assembly difficult and may contribute to leakage if the connection is not correctly matched.

Genuine Mitsubishi OEM Construction

Firstly, MF650114 is a genuine Mitsubishi OEM replacement component. Choosing the original Mitsubishi part helps preserve the factory-style hardware arrangement when servicing a DSM or Evolution engine.

For restoration projects and OEM-focused builds, replacing missing or incorrect hardware with the original Mitsubishi part number also helps maintain consistency throughout the engine bay.

M14x27 Turbo Water-Line Eyebolt

Secondly, MF650114 is an M14 × 27 mm eyebolt with a 1.5 mm thread pitch. This specification distinguishes it from the smaller Mitsubishi turbo oil-feed eyebolts used elsewhere in the engine.

The larger M14 size is associated with the applicable cooling-water or turbo water-line connection, making it important to use the correct part rather than confusing it with M10 or M12 turbo oil-feed hardware.

Designed for Cooling Water Line Connections

Thirdly, Mitsubishi parts catalog information identifies MF650114 as EYEBOLT, COOLING WATER LINE. Specialist Evo parts suppliers also describe it as an OEM turbo water-pipe eyebolt and list applications across Evolution and DSM platforms.

This makes MF650114 a useful replacement when rebuilding or servicing turbocharger coolant plumbing.

Product Specifications

• Brand: Mitsubishi
• Product Type: OEM Cooling Water Line Eyebolt
• Part Number: MF650114
• Mitsubishi Description: Eyebolt, Cooling Water Line
• Size: M14 × 27 mm
• Thread Pitch: 1.5 mm
• Material: OEM Mitsubishi specification
• Condition: Genuine OEM replacement
• Primary Application: Turbocharger / cooling water line
• Connection Type: Eyebolt / banjo-style fluid connection
• Quantity: 1 bolt
• Reference: 10197 / application-specific diagram references

Specialist Mitsubishi parts listings identify MF650114 as a single replacement bolt and note that the precise placement varies between vehicle models.

Mitsubishi Evo and DSM Applications

The MF650114 eyebolt has broad Mitsubishi application coverage. Specialist parts information lists it for 1992–2015 Mitsubishi Evolution I–X, as well as 1990–1999 Mitsubishi Eclipse GST/GSX, 1990–1998 Eagle Talon TSi, and 1990–1994 Plymouth Laser RS.

For Evolution applications, the part is associated with the turbocharger water-line system and can appear in different locations depending on the generation. Mitsubishi catalog data also shows MF650114 across various Mitsubishi vehicle platforms and identifies its function as a cooling-water-line eyebolt.

Because Mitsubishi reused this part across different applications, it is important to match MF650114 against the specific vehicle configuration rather than assuming every M14 fluid connection uses the same eyebolt.

Why Replace the MF650114 Eyebolt?

Small fluid-line hardware is easy to overlook during an engine rebuild, but the correct fastener is essential for proper assembly. Replacing an old or damaged MF650114 can be worthwhile when:

• The original eyebolt is missing
• Threads are damaged
• The bolt head has been rounded
• The original hardware is heavily corroded
• A previous repair used incorrect hardware
• A turbocharger is being replaced
• Turbo coolant lines are being serviced
• The cooling system is being refreshed
• A 4G63 engine is being rebuilt
• An Evo or DSM is being restored to OEM specification

When a banjo-style water line is removed, the associated sealing washers should also be inspected and replaced as necessary. The eyebolt and sealing washers work together to create the proper fluid-line connection.

MF650114 for Turbocharger Water-Line Service

Turbocharged Mitsubishi engines rely on properly routed fluid lines to manage heat around the turbocharger and engine. The MF650114 eyebolt is part of the hardware used to secure the applicable cooling-water connection.

This makes it especially useful during turbocharger installation or removal. Having a new OEM eyebolt available can prevent delays caused by damaged or missing original hardware.

For a complete service, it is also worth checking the condition of the related coolant hose, water pipe, banjo fitting, and crush washers before final assembly. Replacing worn components at the same time can help reduce the possibility of having to reopen the connection later.

OEM Hardware for Mitsubishi Performance Builds

The MF650114 is also a useful component for enthusiasts who want to maintain an original-looking engine bay. Generic replacement hardware may have the wrong dimensions or head design, while the Mitsubishi OEM part is intended for the applicable factory connection.

Whether you are working on an early Evolution, an Evo 7/8/9 4G63, an Evo X, or a DSM turbo system, identifying the correct Mitsubishi part number before ordering is important. MF650114 should be selected specifically where the vehicle’s parts diagram calls for this M14×27 eyebolt.

Buy Mitsubishi OEM Eyebolt M14x27 Online

If you are servicing a Mitsubishi turbocharger water line or restoring the factory cooling-system hardware, the Mitsubishi OEM Eyebolt M14x27 MF650114 provides a genuine replacement for the specified cooling-water-line connection. At evomotorparts.com, you can shop Mitsubishi Evolution and DSM OEM parts, including turbocharger components, coolant hoses, water pipes, crush washers, gaskets, and engine hardware for your build.

Frequently Asked Questions

What is Mitsubishi part MF650114?

MF650114 is a genuine Mitsubishi eyebolt for a cooling water line, commonly used with turbocharger water-line connections on Mitsubishi Evolution and DSM applications.

What size is MF650114?

MF650114 is an M14 × 27 mm eyebolt with a 1.5 mm thread pitch.

Is MF650114 used on Mitsubishi Evolution models?

Yes. Specialist Mitsubishi parts information lists MF650114 across Evolution I through Evolution X, although the exact installation position varies by generation.

Does MF650114 fit DSM models?

Yes. The part is listed for 1G Eclipse GST/GSX, 2G Eclipse GST/GSX, Eagle Talon TSi, and Plymouth Laser RS applications, in addition to Mitsubishi Evolution models.

Is MF650114 an oil-feed or water-line eyebolt?

MF650114 is identified as a cooling water-line eyebolt. It should not be confused with the smaller M10 or M12 Mitsubishi eyebolts used for turbocharger oil-feed applications.

Does the bolt include sealing washers?

MF650114 is sold as the eyebolt itself. Sealing washers are separate components and should be replaced when required for the specific connection.

Is MF650114 sold individually?

Yes. The OEM eyebolt is sold individually, making it suitable for replacing one missing or damaged fastener.

Should I verify fitment before ordering?

Yes. Because MF650114 is used across many Mitsubishi platforms and its exact location can vary by model, matching the part number to your vehicle’s parts diagram or VIN is recommended before ordering. For the correct factory-style cooling-water connection on your Mitsubishi Evolution or DSM, choose the genuine Mitsubishi OEM Eyebolt M14x27 MF650114 and shop your Mitsubishi Evo and DSM parts online at evomotorparts.com.

Buy Mitsubishi OEM Eyebolt M14x27 MF650114 for DSM and Evo turbo water lines. Genuine Mitsubishi cooling water-line eyebolt. Shop online today.