Description

Torque Solution Drive Shaft Carrier Bearing Support Bushings | 1992-2015 Mitsubishi Evolution (TS-EV-DSB)

Firstly, Buy Torque Solution Drive Shaft Carrier Bearing Support Bushings TS-EV-DSB for 1992–2015 Mitsubishi Evolution models. Upgrade the drivetrain support system of your Mitsubishi Lancer Evolution with Torque Solution Drive Shaft Carrier Bearing Support Bushings, part number TS-EV-DSB. Designed for Mitsubishi Evolution models from 1992 through 2015, these performance drivetrain bushings replace the factory rubber carrier-bearing support mounts with rigid, black-anodized 6061 billet aluminum components. The result is a more controlled propeller shaft with reduced movement under hard acceleration, braking, and cornering.

The driveshaft plays a critical role in transferring power from the transmission and transfer case to the rear differential. While the factory rubber mounts provide isolation and comfort, their flexibility can allow unwanted movement of the propeller shaft when the drivetrain is subjected to high loads. The Torque Solution TS-EV-DSB addresses this movement by providing a significantly more rigid mounting solution for the driveshaft carrier bearing.

For Evo owners building a street car, track car, drag setup, or high-performance 4G63 or 4B11T-powered vehicle, controlling drivetrain movement can be an important part of improving power delivery and traction.

Torque Solution Drive Shaft Carrier Bearing Support Bushings

The Torque Solution Drive Shaft Carrier Bearing Support Bushings are engineered to replace the OEM rubber carrier-bearing mounts with billet aluminum bushings. Torque Solution states that the design helps keep the propeller shaft from moving during hard acceleration, stopping, and turning, while also helping reduce wheel hop and traction loss.

The TS-EV-DSB is manufactured from 6061 billet aluminum and finished with a black anodized coating. This construction provides a rigid support point for the driveshaft carrier assembly while offering the durability expected from a performance drivetrain component.

The kit is intended for both street and track applications and has been described by Torque Solution as street and track tested. It is also backed by a limited lifetime warranty from Torque Solution.

Why Upgrade the OEM Driveshaft Carrier Support?

The factory driveshaft carrier support system uses rubber mounts to isolate drivetrain movement and vibration. Over time, those rubber components can become softer, deteriorate, or allow more movement than desired, particularly on vehicles exposed to hard launches, increased power, aggressive shifting, or track use.

Installing billet carrier-bearing support bushings provides a much more rigid mounting arrangement. By limiting unnecessary propeller-shaft movement, the drivetrain can remain more stable when torque is applied.

Firstly, the TS-EV-DSB is designed to reduce wheel hop and traction loss by limiting unwanted driveshaft movement.

Secondly, the increased rigidity can contribute to improved acceleration and 60-foot times, which makes the upgrade particularly relevant for drag-oriented Evo builds.

Thirdly, the billet construction provides a durable alternative to aging OEM rubber support mounts for enthusiasts looking to reinforce the drivetrain.

These improvements are especially useful when the vehicle is producing more power than the original factory configuration or is regularly driven aggressively.

Key Features

The Torque Solution TS-EV-DSB offers several features that make it a practical upgrade for Mitsubishi Evolution drivetrain systems:

• Torque Solution part number: TS-EV-DSB
• Application: Mitsubishi Lancer Evolution I–IX and Evolution X
• Model years: 1992–2015
• Component: Driveshaft carrier bearing support bushings
• Construction: 6061 billet aluminum
• Finish: Black anodized
• Function: Replaces OEM rubber carrier-bearing support mounts
• Performance benefit: Helps reduce driveshaft movement
• Traction benefit: Designed to reduce wheel hop and traction loss
• Use: Street and track applications
• Kit contents: Eight pieces for four bushings
• Warranty: Torque Solution limited lifetime warranty

Mitsubishi Evolution Fitment

The TS-EV-DSB is designed around a broad range of Mitsubishi Evolution applications. Listed Evolution fitment includes Evolution I, Evolution II, Evolution III, Evolution IV, Evolution V, Evolution VI, Evolution VII, Evolution VIII, Evolution IX, and Evolution X. The Evolution I–IX applications cover the earlier 4G63-powered generations, while Evolution X applications use the 4B11T platform.

Buy Torque Solution Drive Shaft Carrier Bearing Support Bushings TS-EV-DSB for 1992–2015 Mitsubishi Evolution models, Shop Evo drivetrain parts online.

For the 2008–2015 Evolution X, this makes the TS-EV-DSB a relevant drivetrain-support upgrade for both GSR and MR applications where compatible with the vehicle’s specific carrier-bearing arrangement. Always verify the exact vehicle configuration before ordering, particularly on modified or non-standard drivetrain setups.

Designed for Street and Track Builds

One of the advantages of the TS-EV-DSB is its suitability for different types of Evolution builds. A mildly modified street Evo can benefit from improved driveshaft support, while a drag or track car can take advantage of the additional rigidity when drivetrain loads increase.

On a high-performance Mitsubishi Evolution, hard launches and rapid gear changes can place significant loads through the transmission, transfer case, driveshaft, and rear differential. Excessive movement around the carrier bearing can contribute to drivetrain instability and unwanted wheel hop.

By replacing the flexible OEM rubber mounts with rigid billet aluminum bushings, the TS-EV-DSB provides a more secure foundation for the driveshaft carrier assembly.

This makes it a useful supporting modification alongside other drivetrain upgrades such as upgraded engine mounts, transmission mounts, differential bushings, clutch upgrades, upgraded driveshafts, and performance suspension components.

Installation and Compatibility

The TS-EV-DSB is a replacement support-bushing solution for the factory driveshaft carrier-bearing mounting system. The kit includes eight pieces for four bushings, providing the components necessary for the intended carrier support application.

Installation should be performed with the vehicle properly supported and the driveshaft carrier assembly accessible. Because drivetrain components can be under load and incorrect installation may cause vibration or premature wear, professional installation is recommended if you are not experienced with Mitsubishi AWD drivetrain service.

After installation, inspect the driveshaft, carrier bearing, mounting hardware, and surrounding components for wear or damage. If the carrier bearing itself is worn, replacing only the support bushings may not correct an existing bearing problem.

Ideal for Mitsubishi Evo Performance Builds

The Torque Solution Drive Shaft Carrier Bearing Support Bushings TS-EV-DSB are particularly well suited to Mitsubishi Evolution owners who want to improve drivetrain stability without replacing the entire driveshaft assembly.

Whether you are restoring an older Evo I–VI, upgrading an Evo VII, VIII, or IX, or strengthening the drivetrain of an Evo X, these billet carrier support bushings provide a straightforward way to reduce unwanted propeller-shaft movement.

They are also a useful consideration when refreshing an older vehicle where the original rubber mounts have become worn or excessively flexible.

Frequently Asked Questions

What does the Torque Solution TS-EV-DSB do?

The TS-EV-DSB replaces the OEM rubber driveshaft carrier-support mounts with rigid 6061 billet aluminum bushings. The design helps control propeller-shaft movement during acceleration, braking, and cornering.

What material are the bushings made from?

The bushings are made from 6061 billet aluminum and feature a black anodized finish.

Does TS-EV-DSB fit the Evo X?

Yes. Torque Solution lists the TS-EV-DSB for Mitsubishi Evolution X models from 2008–2015, in addition to Evolution I–IX applications.

Does it fit Evo 8 and Evo 9?

Yes. The TS-EV-DSB is listed for Mitsubishi Evolution I–IX, which includes the Evo 8 and Evo 9.

Can these bushings reduce wheel hop?

Torque Solution specifically lists reduced wheel hop and traction loss as benefits of the TS-EV-DSB.

Is this suitable for a track or drag Evo?

Yes. Torque Solution describes the bushings as street and track tested and lists improved 60-foot times and E.T. performance among the intended benefits.

What is included with the kit?

The kit includes eight pieces for four bushings according to STM Tuned’s product listing.

Does the kit replace the driveshaft carrier bearing itself?

No. The TS-EV-DSB is designed to replace the carrier-bearing support mounts/bushings. If the actual carrier bearing is worn or damaged, that component should be inspected and replaced separately if necessary. For Mitsubishi Evolution owners looking to improve driveshaft control and reinforce the AWD drivetrain, the Torque Solution TS-EV-DSB Drive Shaft Carrier Bearing Support Bushings provide a durable billet-aluminum upgrade for Evo I through Evo X applications, making them a strong addition to a street, track, or performance-focused drivetrain build—shop and order your Mitsubishi Evo drivetrain parts from evomotorparts.com today.

Buy Torque Solution Drive Shaft Carrier Bearing Support Bushings TS-EV-DSB for 1992–2015 Mitsubishi Evolution models, Shop Evo drivetrain parts online.