Description

AMS Mitsubishi Lancer Evolution X Performance Intake Black Wrinkle – AMS.04.08.0002-2

Firstly, BUY AMS Evo X Performance Intake for Mitsubishi Evolution X. Upgrade the air induction system of your Mitsubishi Lancer Evolution X with the AMS Mitsubishi Lancer Evolution X Performance Intake Black Wrinkle, part number AMS.04.08.0002-2. Developed by AMS Performance specifically for the Evo X platform, this performance intake is designed to improve airflow to the turbocharger while simplifying the engine bay and replacing the restrictive factory intake configuration with a larger, professionally fabricated intake system. AMS specifies the system for 2008–2015 Mitsubishi Evolution X GSR and MR models, including USDM, JDM, and European-market applications.

The AMS EVO X Performance Intake uses professionally TIG-welded 3-inch mandrel-bent aluminum piping, a CNC-machined aluminum MAF sensor flange, a high-flow K&N air filter, 4-ply silicone couplers, stainless-steel hardware, and an intake fan shield. The black wrinkle powder-coated finish gives the engine bay a clean, understated performance appearance while providing an alternative to the polished version of the same intake system.

Designed for the Mitsubishi 4B11T turbocharged engine, the intake provides a more direct and high-flow path toward the turbocharger. AMS also engineered the BOV recirculation tube entry so that it sits in line with the induction path, helping minimize unnecessary turbulence in the intake tract.

For Evo X owners building a responsive street car, upgraded turbo setup, track vehicle, or performance-focused 4B11T project, the AMS intake provides a combination of airflow improvement, professional construction, engine-bay appearance, and compatibility with a wide range of Mitsubishi Evo X performance modifications.

AMS Evo X Performance Intake Features

The AMS Evo X Performance Intake is designed around several important features that make it a popular upgrade for the 4B11T platform:

• AMS Performance part number AMS.04.08.0002-2
• Black wrinkle powder-coated finish
• Designed for Mitsubishi Lancer Evolution X
• Fits Evo X GSR and MR models
• 2008–2015 application
• Compatible with USDM, JDM, and European-market models
• Professionally TIG-welded construction
• 3-inch mandrel-bent aluminum intake piping
• CNC-machined aluminum MAF sensor flange
• High-flow K&N air filter included
• 4-ply silicone couplers
• Stainless-steel hardware
• Intake fan shield included
• Boost source port
• Crankcase breather port
• BOV recirculation tube positioned in line with the induction path
• Designed to improve airflow to the turbocharger
• Simplifies the Evo X engine bay

3-Inch Aluminum Intake Construction

One of the key advantages of this AMS intake is its 3-inch mandrel-bent aluminum construction. Mandrel bending helps maintain the internal diameter through the bends instead of creating the significant restriction that can occur with poorly designed tubing.

AMS professionally TIG welds the intake components in-house, producing a rigid and purpose-built intake assembly for the Evo X. The CNC aluminum MAF sensor flange provides the correct mounting location for the factory MAF sensor, while the integrated ports accommodate the supporting connections required by the 4B11T intake system.

This combination makes the system particularly suitable for enthusiasts who want to replace the factory intake with a performance-oriented component without resorting to a generic universal intake pipe.

Improved Turbocharger Airflow

The primary purpose of the AMS Performance Intake is to improve the airflow path leading toward the turbocharger. The larger 3-inch intake configuration and carefully positioned BOV recirculation entry are designed to provide a smoother induction path.

AMS reported a 45 awhp gain over stock on its test vehicle when the intake was installed together with an AMS manual boost controller set at the factory 21 psi. This figure represents AMS’s specific test configuration and should not be interpreted as a guaranteed gain for every Evo X. Actual results can vary depending on the turbocharger, boost level, ECU calibration, exhaust system, intercooler, engine condition, fuel, and other modifications.

For a modified 4B11T engine, intake airflow is only one part of the overall performance equation. The best results come from matching the intake to the vehicle’s turbocharger, ECU calibration and supporting hardware.

Black Wrinkle Finish

The AMS.04.08.0002-2 version features a black wrinkle powder-coated finish. This gives the intake a subtle motorsport-inspired appearance that works particularly well with factory or modified Evo X engine bays.

The black finish also provides an alternative for owners who prefer a darker engine-bay theme rather than the polished aluminum appearance of the other AMS intake configuration. AMS has offered the Evo X Performance Intake in wrinkle black as part of its performance intake range.

K&N Filter, Couplers and Hardware

The intake system is supplied with a high-flow K&N air filter, 4-ply silicone couplers and stainless-steel hardware. This means the kit is designed as a complete performance intake system rather than simply an aftermarket replacement section of tubing.

The included intake fan shield further supports the system’s installation and helps separate the filter area from the surrounding engine-bay environment.

Evo X Compatibility and Tuning

The AMS intake is designed for the Mitsubishi Lancer Evolution X GSR and MR and is listed for USDM, JDM and European-market vehicles. Current supporting listings identify the application as 2008–2015 Mitsubishi Evolution X.

There is an important tuning consideration. AMS states that 2008 Evo X models do not require a tune with the addition of this intake, while 2010 and later models require a custom ECU tune for safe operation. AMS warns that failing to tune these later models can cause drivability issues or engine damage.

Because ECU calibration requirements can depend on the exact vehicle configuration, turbocharger, MAF housing and other modifications, professional calibration is recommended whenever appropriate.

Installation

The AMS intake is designed as a vehicle-specific performance upgrade, but professional installation is recommended for the best results. The installer should verify all coupler connections, MAF sensor installation, breather connections, BOV recirculation plumbing and intake hardware before starting the vehicle.

For Evo X MR applications, some supporting retailers note that clearancing of the inlet pipe may be required for fitment. Confirm the installation requirements for your specific MR configuration before ordering.

After installation, inspect the system for air leaks and confirm that the MAF sensor is correctly installed. On applicable model years, the vehicle should also receive the required ECU calibration before normal performance driving.

Buy AMS Evo X Performance Intake Online

If you are looking to buy AMS Evo X Performance Intake components online, the AMS.04.08.0002-2 is a purpose-built option for Mitsubishi Evolution X owners who want increased intake airflow and professional aftermarket construction.

This intake is also a strong choice for enthusiasts shopping for Mitsubishi Evo parts, 4B11T performance upgrades, turbocharger supporting components and engine-bay improvements. It can be integrated into a larger Evo X build alongside an upgraded turbocharger, intercooler, exhaust system, boost-control hardware and ECU tuning.

When you shop for performance intake systems, always confirm the exact part number and finish. The AMS.04.08.0002-2 identifies the black wrinkle configuration with the applicable MAF and breather-bung arrangement.

Frequently Asked Questions

What is AMS.04.08.0002-2?

AMS.04.08.0002-2 is the black wrinkle version of the AMS Mitsubishi Lancer Evolution X Performance Intake. It uses 3-inch aluminum intake piping and is designed for the Evo X 4B11T platform.

Does this AMS intake fit the Evo X GSR and MR?

Yes. AMS lists the intake for Mitsubishi Evolution X GSR and MR models. It is also listed for USDM, JDM and European-market vehicles.

What years does the AMS Evo X intake fit?

The application is listed for 2008–2015 Mitsubishi Lancer Evolution X models. Always verify your specific configuration before ordering.

Is the AMS.04.08.0002-2 black?

Yes. Part number AMS.04.08.0002-2 is the black wrinkle powder-coated configuration.

Does the intake include a filter?

Yes. AMS specifies that a high-flow K&N air filter is included. The system also includes 4-ply silicone couplers and stainless-steel hardware.

Does the AMS intake require an ECU tune?

AMS states that 2008 Evo X models do not require a tune, while 2010 and later models require a custom ECU tune for safe operation with this intake. Follow AMS’s application-specific guidance and have the vehicle properly calibrated where required.

Will this intake work with a modified Evo X turbo setup?

The intake is designed as a high-flow turbocharger induction upgrade and can be used as part of a modified Evo X performance build. However, compatibility should be considered alongside the turbocharger, MAF configuration, ECU calibration and other supporting modifications.

Is this a complete intake system?

The AMS package includes the performance intake system, K&N filter, 4-ply silicone couplers, stainless-steel hardware and intake fan shield.

Why Buy from EvoMotorParts.com?

At EvoMotorParts.com, we specialize in Mitsubishi Evolution performance and replacement parts for enthusiasts, builders and workshops.

• Quality Mitsubishi Evolution performance parts
• Genuine OEM and premium aftermarket components
• Performance upgrades for Evo 7, Evo 8, Evo 9 and Evo X
• 4G63 and 4B11T performance parts
• Competitive pricing
• Worldwide shipping
• Dedicated support for Mitsubishi Evolution enthusiasts
• Convenient online ordering for customers worldwide

Whether you are located in the United States, Canada, United Kingdom, Australia, Europe, Japan or another international Evo market, you can shop Mitsubishi Evo parts through EvoMotorParts.com and build your vehicle with carefully selected performance components.

Conclusion

The AMS Mitsubishi Lancer Evolution X Performance Intake Black Wrinkle AMS.04.08.0002-2 is a purpose-built 4B11T intake upgrade combining 3-inch mandrel-bent aluminum construction, professional TIG welding, a CNC MAF flange, high-flow K&N filter, 4-ply silicone couplers, stainless hardware and optimized BOV recirculation routing.

It is designed to improve airflow toward the turbocharger while simplifying the Evo X engine bay and adding a clean black wrinkle finish. For owners developing a street-driven Evo X, performance build or more extensively modified 4B11T setup, this AMS intake provides a proven foundation for improved induction performance.

Shop the AMS Evo X Performance Intake at EvoMotorParts.com and order genuine AMS performance components for your Mitsubishi Evolution X build.

BUY AMS Evo X Performance Intake for Mitsubishi Evolution X, Black wrinkle 3-inch intake with K&N filter, TIG-welded aluminum piping and MAF flange